Struct stm32_metapac::sai::regs::Im

#[repr(transparent)]
pub struct Im(pub u32);

Interrupt mask register 2

Tuple Fields

0: u32

Implementations

impl Im

pub const fn ovrudrie(&self) -> bool

Overrun/underrun interrupt enable. This bit is set and cleared by software. When this bit is set, an interrupt is generated if the OVRUDR bit in the SAI_xSR register is set.

pub fn set_ovrudrie(&mut self, val: bool)

Overrun/underrun interrupt enable. This bit is set and cleared by software. When this bit is set, an interrupt is generated if the OVRUDR bit in the SAI_xSR register is set.

pub const fn mutedetie(&self) -> bool

Mute detection interrupt enable. This bit is set and cleared by software. When this bit is set, an interrupt is generated if the MUTEDET bit in the SAI_xSR register is set. This bit has a meaning only if the audio block is configured in receiver mode.

pub fn set_mutedetie(&mut self, val: bool)

Mute detection interrupt enable. This bit is set and cleared by software. When this bit is set, an interrupt is generated if the MUTEDET bit in the SAI_xSR register is set. This bit has a meaning only if the audio block is configured in receiver mode.

pub const fn wckcfgie(&self) -> bool

Wrong clock configuration interrupt enable. This bit is set and cleared by software. This bit is taken into account only if the audio block is configured as a master (MODE[1] = 0) and NODIV = 0. It generates an interrupt if the WCKCFG flag in the SAI_xSR register is set. Note: This bit is used only in TDM mode and is meaningless in other modes.

pub fn set_wckcfgie(&mut self, val: bool)

Wrong clock configuration interrupt enable. This bit is set and cleared by software. This bit is taken into account only if the audio block is configured as a master (MODE[1] = 0) and NODIV = 0. It generates an interrupt if the WCKCFG flag in the SAI_xSR register is set. Note: This bit is used only in TDM mode and is meaningless in other modes.

pub const fn freqie(&self) -> bool

FIFO request interrupt enable. This bit is set and cleared by software. When this bit is set, an interrupt is generated if the FREQ bit in the SAI_xSR register is set. Since the audio block defaults to operate as a transmitter after reset, the MODE bit must be configured before setting FREQIE to avoid a parasitic interruption in receiver mode,

pub fn set_freqie(&mut self, val: bool)

FIFO request interrupt enable. This bit is set and cleared by software. When this bit is set, an interrupt is generated if the FREQ bit in the SAI_xSR register is set. Since the audio block defaults to operate as a transmitter after reset, the MODE bit must be configured before setting FREQIE to avoid a parasitic interruption in receiver mode,

pub const fn cnrdyie(&self) -> bool

Codec not ready interrupt enable (AC97). This bit is set and cleared by software. When the interrupt is enabled, the audio block detects in the slot 0 (tag0) of the AC97 frame if the Codec connected to this line is ready or not. If it is not ready, the CNRDY flag in the SAI_xSR register is set and an interruption i generated. This bit has a meaning only if the AC97 mode is selected through PRTCFG[1:0] bits and the audio block is operates as a receiver.

pub fn set_cnrdyie(&mut self, val: bool)

Codec not ready interrupt enable (AC97). This bit is set and cleared by software. When the interrupt is enabled, the audio block detects in the slot 0 (tag0) of the AC97 frame if the Codec connected to this line is ready or not. If it is not ready, the CNRDY flag in the SAI_xSR register is set and an interruption i generated. This bit has a meaning only if the AC97 mode is selected through PRTCFG[1:0] bits and the audio block is operates as a receiver.

pub const fn afsdetie(&self) -> bool

Anticipated frame synchronization detection interrupt enable. This bit is set and cleared by software. When this bit is set, an interrupt will be generated if the AFSDET bit in the SAI_xSR register is set. This bit is meaningless in AC97, SPDIF mode or when the audio block operates as a master.

pub fn set_afsdetie(&mut self, val: bool)

Anticipated frame synchronization detection interrupt enable. This bit is set and cleared by software. When this bit is set, an interrupt will be generated if the AFSDET bit in the SAI_xSR register is set. This bit is meaningless in AC97, SPDIF mode or when the audio block operates as a master.

pub const fn lfsdetie(&self) -> bool

Late frame synchronization detection interrupt enable. This bit is set and cleared by software. When this bit is set, an interrupt will be generated if the LFSDET bit is set in the SAI_xSR register. This bit is meaningless in AC97, SPDIF mode or when the audio block operates as a master.

pub fn set_lfsdetie(&mut self, val: bool)

Late frame synchronization detection interrupt enable. This bit is set and cleared by software. When this bit is set, an interrupt will be generated if the LFSDET bit is set in the SAI_xSR register. This bit is meaningless in AC97, SPDIF mode or when the audio block operates as a master.

Trait Implementations

impl Clone for Im

fn clone(&self) -> Im

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Im

fn default() -> Im

Returns the “default value” for a type.

impl PartialEq for Im

fn eq(&self, other: &Im) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Im

impl Eq for Im

impl StructuralEq for Im

impl StructuralPartialEq for Im