Struct symphonia_core::audio::Channels

pub struct Channels { /* private fields */ }

A bitmask representing the audio channels in an audio buffer or signal.

The first 18 defined channels are guaranteed to be identical to those specified by Microsoft’s WAVEFORMATEXTENSIBLE structure. Channels after 18 are defined by Symphonia and no order is guaranteed.

Implementations

impl Channels

pub const FRONT_LEFT: Self = _

Front-left (left) or the Mono channel.

pub const FRONT_RIGHT: Self = _

Front-right (right) channel.

pub const FRONT_CENTRE: Self = _

Front-centre (centre) channel.

pub const LFE1: Self = _

Low frequency channel 1.

pub const REAR_LEFT: Self = _

Rear-left (surround rear left) channel.

pub const REAR_RIGHT: Self = _

Rear-right (surround rear right) channel.

pub const FRONT_LEFT_CENTRE: Self = _

Front left-of-centre (left center) channel.

pub const FRONT_RIGHT_CENTRE: Self = _

Front right-of-centre (right center) channel.

pub const REAR_CENTRE: Self = _

Rear-centre (surround rear centre) channel.

pub const SIDE_LEFT: Self = _

Side left (surround left) channel.

pub const SIDE_RIGHT: Self = _

Side right (surround right) channel.

pub const TOP_CENTRE: Self = _

Top centre channel.

pub const TOP_FRONT_LEFT: Self = _

Top front-left channel.

pub const TOP_FRONT_CENTRE: Self = _

Top centre channel.

pub const TOP_FRONT_RIGHT: Self = _

Top front-right channel.

pub const TOP_REAR_LEFT: Self = _

Top rear-left channel.

pub const TOP_REAR_CENTRE: Self = _

Top rear-centre channel.

pub const TOP_REAR_RIGHT: Self = _

Top rear-right channel.

pub const REAR_LEFT_CENTRE: Self = _

Rear left-of-centre channel.

pub const REAR_RIGHT_CENTRE: Self = _

Rear right-of-centre channel.

pub const FRONT_LEFT_WIDE: Self = _

Front left-wide channel.

pub const FRONT_RIGHT_WIDE: Self = _

Front right-wide channel.

pub const FRONT_LEFT_HIGH: Self = _

Front left-high channel.

pub const FRONT_CENTRE_HIGH: Self = _

Front centre-high channel.

pub const FRONT_RIGHT_HIGH: Self = _

Front right-high channel.

pub const LFE2: Self = _

Low frequency channel 2.

pub const fn empty() -> Self

Returns an empty set of flags.

pub const fn all() -> Self

Returns the set containing all flags.

pub const fn bits(&self) -> u32

Returns the raw value of the flags currently stored.

pub const fn from_bits(bits: u32) -> Option<Self>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: u32) -> Self

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: u32) -> Self

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: Self) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: Self) -> bool

Returns true if all of the flags in other are contained within self.

pub fn insert(&mut self, other: Self)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: Self)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: Self)

Toggles the specified flags in-place.

pub fn set(&mut self, other: Self, value: bool)

Inserts or removes the specified flags depending on the passed value.

pub const fn intersection(self, other: Self) -> Self

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

pub const fn union(self, other: Self) -> Self

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

pub const fn difference(self, other: Self) -> Self

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

pub const fn symmetric_difference(self, other: Self) -> Self

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

pub const fn complement(self) -> Self

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

impl Channels

pub fn count(self) -> usize

Gets the number of channels.

pub fn iter(&self) -> ChannelsIter

Gets an iterator over individual channels.

Trait Implementations

impl Binary for Channels

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for Channels

fn bitand(self, other: Self) -> Self

Returns the intersection between the two sets of flags.

type Output = Channels

The resulting type after applying the & operator.

impl BitAndAssign for Channels

fn bitand_assign(&mut self, other: Self)

Disables all flags disabled in the set.

impl BitOr for Channels

fn bitor(self, other: Channels) -> Self

Returns the union of the two sets of flags.

type Output = Channels

The resulting type after applying the | operator.

impl BitOrAssign for Channels

fn bitor_assign(&mut self, other: Self)

Adds the set of flags.

impl BitXor for Channels

fn bitxor(self, other: Self) -> Self

Returns the left flags, but with all the right flags toggled.

type Output = Channels

The resulting type after applying the ^ operator.

impl BitXorAssign for Channels

fn bitxor_assign(&mut self, other: Self)

Toggles the set of flags.

impl Clone for Channels

fn clone(&self) -> Channels

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Channels

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Channels

fn default() -> Channels

Returns the “default value” for a type.

impl Display for Channels

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<Channels> for Channels

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FromIterator<Channels> for Channels

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

Creates a value from an iterator.

impl Hash for Channels

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl LowerHex for Channels

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for Channels

fn not(self) -> Self

Returns the complement of this set of flags.

type Output = Channels

The resulting type after applying the ! operator.

impl Octal for Channels

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for Channels

fn cmp(&self, other: &Channels) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq for Channels

fn eq(&self, other: &Channels) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for Channels

fn partial_cmp(&self, other: &Channels) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Sub for Channels

fn sub(self, other: Self) -> Self

Returns the set difference of the two sets of flags.

type Output = Channels

The resulting type after applying the - operator.

impl SubAssign for Channels

fn sub_assign(&mut self, other: Self)

Disables all flags enabled in the set.

impl UpperHex for Channels

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for Channels

impl Eq for Channels

impl StructuralPartialEq for Channels