Enum trust_dns_proto::rr::rdata::svcb::SvcParamValue

pub enum SvcParamValue {
    Mandatory(Mandatory),
    Alpn(Alpn),
    NoDefaultAlpn,
    Port(u16),
    Ipv4Hint(IpHint<Ipv4Addr>),
    EchConfig(EchConfig),
    Ipv6Hint(IpHint<Ipv6Addr>),
    Unknown(Unknown),
}

Warning, it is currently up to users of this type to validate the data against that expected by the key

  *  a 2 octet field containing the length of the SvcParamValue as an
     integer between 0 and 65535 in network byte order (but constrained
     by the RDATA and DNS message sizes).
  *  an octet string of this length whose contents are in a format
     determined by the SvcParamKey.

Variants

Mandatory(Mandatory)

In a ServiceMode RR, a SvcParamKey is considered “mandatory” if the RR will not function correctly for clients that ignore this SvcParamKey. Each SVCB protocol mapping SHOULD specify a set of keys that are “automatically mandatory”, i.e. mandatory if they are present in an RR. The SvcParamKey “mandatory” is used to indicate any mandatory keys for this RR, in addition to any automatically mandatory keys that are present.

see Mandatory

Alpn(Alpn)

The “alpn” and “no-default-alpn” SvcParamKeys together indicate the set of Application Layer Protocol Negotiation (ALPN) protocol identifiers Alpn and associated transport protocols supported by this service endpoint.

NoDefaultAlpn

For “no-default-alpn”, the presentation and wire format values MUST be empty. See also Alpn

Port(u16)

   6.2.  "port"

  The "port" SvcParamKey defines the TCP or UDP port that should be
  used to reach this alternative endpoint.  If this key is not present,
  clients SHALL use the authority endpoint's port number.

  The presentation "value" of the SvcParamValue is a single decimal
  integer between 0 and 65535 in ASCII.  Any other "value" (e.g. an
  empty value) is a syntax error.  To enable simpler parsing, this
  SvcParam MUST NOT contain escape sequences.

  The wire format of the SvcParamValue is the corresponding 2 octet
  numeric value in network byte order.

  If a port-restricting firewall is in place between some client and
  the service endpoint, changing the port number might cause that
  client to lose access to the service, so operators should exercise
  caution when using this SvcParamKey to specify a non-default port.

Ipv4Hint(IpHint<Ipv4Addr>)

The “ipv4hint” and “ipv6hint” keys convey IP addresses that clients MAY use to reach the service. If A and AAAA records for TargetName are locally available, the client SHOULD ignore these hints. Otherwise, clients SHOULD perform A and/or AAAA queries for TargetName as in Section 3, and clients SHOULD use the IP address in those responses for future connections. Clients MAY opt to terminate any connections using the addresses in hints and instead switch to the addresses in response to the TargetName query. Failure to use A and/or AAAA response addresses could negatively impact load balancing or other geo-aware features and thereby degrade client performance.

see IpHint

EchConfig(EchConfig)

6.3.  "echconfig"

  The SvcParamKey to enable Encrypted ClientHello (ECH) is "echconfig".
  Its value is defined in Section 9.  It is applicable to most TLS-
  based protocols.

  When publishing a record containing an "echconfig" parameter, the
  publisher MUST ensure that all IP addresses of TargetName correspond
  to servers that have access to the corresponding private key or are
  authoritative for the public name.  (See Section 7.2.2 of [ECH] for
  more details about the public name.)  This yields an anonymity set of
  cardinality equal to the number of ECH-enabled server domains
  supported by a given client-facing server.  Thus, even with an
  encrypted ClientHello, an attacker who can enumerate the set of ECH-
  enabled domains supported by a client-facing server can guess the
  correct SNI with probability at least 1/K, where K is the size of
  this ECH-enabled server anonymity set.  This probability may be
  increased via traffic analysis or other mechanisms.

Ipv6Hint(IpHint<Ipv6Addr>)

See IpHint

Unknown(Unknown)

Unparsed network data. Refer to documents on the associated key value

This will be left as is when read off the wire, and encoded in bas64 for presentation.

Implementations

impl SvcParamValue

pub fn as_mandatory_mut(&mut self) -> Option<&mut Mandatory>

Optionally returns mutable references to the inner fields if this is a SvcParamValue::Mandatory, otherwise None

pub fn as_mandatory(&self) -> Option<&Mandatory>

Optionally returns references to the inner fields if this is a SvcParamValue::Mandatory, otherwise None

pub fn into_mandatory(self) -> Result<Mandatory, Self>

Returns the inner fields if this is a SvcParamValue::Mandatory, otherwise returns back the enum in the Err case of the result

pub fn as_alpn_mut(&mut self) -> Option<&mut Alpn>

Optionally returns mutable references to the inner fields if this is a SvcParamValue::Alpn, otherwise None

pub fn as_alpn(&self) -> Option<&Alpn>

Optionally returns references to the inner fields if this is a SvcParamValue::Alpn, otherwise None

pub fn into_alpn(self) -> Result<Alpn, Self>

Returns the inner fields if this is a SvcParamValue::Alpn, otherwise returns back the enum in the Err case of the result

pub fn is_no_default_alpn(&self) -> bool

Returns true if this is a SvcParamValue::NoDefaultAlpn, otherwise false

pub fn as_port_mut(&mut self) -> Option<&mut u16>

Optionally returns mutable references to the inner fields if this is a SvcParamValue::Port, otherwise None

pub fn as_port(&self) -> Option<&u16>

Optionally returns references to the inner fields if this is a SvcParamValue::Port, otherwise None

pub fn into_port(self) -> Result<u16, Self>

Returns the inner fields if this is a SvcParamValue::Port, otherwise returns back the enum in the Err case of the result

pub fn as_ipv4_hint_mut(&mut self) -> Option<&mut IpHint<Ipv4Addr>>

Optionally returns mutable references to the inner fields if this is a SvcParamValue::Ipv4Hint, otherwise None

pub fn as_ipv4_hint(&self) -> Option<&IpHint<Ipv4Addr>>

Optionally returns references to the inner fields if this is a SvcParamValue::Ipv4Hint, otherwise None

pub fn into_ipv4_hint(self) -> Result<IpHint<Ipv4Addr>, Self>

Returns the inner fields if this is a SvcParamValue::Ipv4Hint, otherwise returns back the enum in the Err case of the result

pub fn as_ech_config_mut(&mut self) -> Option<&mut EchConfig>

Optionally returns mutable references to the inner fields if this is a SvcParamValue::EchConfig, otherwise None

pub fn as_ech_config(&self) -> Option<&EchConfig>

Optionally returns references to the inner fields if this is a SvcParamValue::EchConfig, otherwise None

pub fn into_ech_config(self) -> Result<EchConfig, Self>

Returns the inner fields if this is a SvcParamValue::EchConfig, otherwise returns back the enum in the Err case of the result

pub fn as_ipv6_hint_mut(&mut self) -> Option<&mut IpHint<Ipv6Addr>>

Optionally returns mutable references to the inner fields if this is a SvcParamValue::Ipv6Hint, otherwise None

pub fn as_ipv6_hint(&self) -> Option<&IpHint<Ipv6Addr>>

Optionally returns references to the inner fields if this is a SvcParamValue::Ipv6Hint, otherwise None

pub fn into_ipv6_hint(self) -> Result<IpHint<Ipv6Addr>, Self>

Returns the inner fields if this is a SvcParamValue::Ipv6Hint, otherwise returns back the enum in the Err case of the result

pub fn as_unknown_mut(&mut self) -> Option<&mut Unknown>

Optionally returns mutable references to the inner fields if this is a SvcParamValue::Unknown, otherwise None

pub fn as_unknown(&self) -> Option<&Unknown>

Optionally returns references to the inner fields if this is a SvcParamValue::Unknown, otherwise None

pub fn into_unknown(self) -> Result<Unknown, Self>

Returns the inner fields if this is a SvcParamValue::Unknown, otherwise returns back the enum in the Err case of the result

Trait Implementations

impl BinEncodable for SvcParamValue

fn emit(&self, encoder: &mut BinEncoder<'_>) -> ProtoResult<()>

Write the type to the stream

fn to_bytes(&self) -> ProtoResult<Vec<u8>>

Returns the object in binary form

impl Clone for SvcParamValue

fn clone(&self) -> SvcParamValue

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SvcParamValue

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<'de> Deserialize<'de> for SvcParamValue

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error> where
    __D: Deserializer<'de>, 

Deserialize this value from the given Serde deserializer.

impl Display for SvcParamValue

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Hash for SvcParamValue

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl PartialEq<SvcParamValue> for SvcParamValue

fn eq(&self, other: &SvcParamValue) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Serialize for SvcParamValue

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error> where
    __S: Serializer, 

Serialize this value into the given Serde serializer.

impl Eq for SvcParamValue

impl StructuralEq for SvcParamValue

impl StructuralPartialEq for SvcParamValue