Struct uom::si::length::picometer

pub struct picometer;

Measurement unit.

Trait Implementations

impl Clone for picometer

fn clone(&self) -> picometer

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Conversion<BigInt> for picometer

type T = Ratio<BigInt>

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<BigInt> for picometer

impl Conversion<BigUint> for picometer

type T = Ratio<BigUint>

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<BigUint> for picometer

impl Conversion<Ratio<BigInt>> for picometer

type T = BigRational

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<Ratio<BigInt>> for picometer

impl Conversion<Ratio<i32>> for picometer

type T = Rational32

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<Ratio<i32>> for picometer

impl Conversion<Ratio<i64>> for picometer

type T = Rational64

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<Ratio<i64>> for picometer

impl Conversion<Ratio<isize>> for picometer

type T = Rational

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<Ratio<isize>> for picometer

impl Conversion<f32> for picometer

type T = f32

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<f32> for picometer

impl Conversion<f64> for picometer

type T = f64

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<f64> for picometer

impl Conversion<i128> for picometer

type T = Ratio<i128>

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<i128> for picometer

impl Conversion<i16> for picometer

type T = Ratio<i16>

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<i16> for picometer

impl Conversion<i32> for picometer

type T = Ratio<i32>

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<i32> for picometer

impl Conversion<i64> for picometer

type T = Ratio<i64>

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<i64> for picometer

impl Conversion<i8> for picometer

type T = Ratio<i8>

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<i8> for picometer

impl Conversion<isize> for picometer

type T = Ratio<isize>

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<isize> for picometer

impl Conversion<u128> for picometer

type T = Ratio<u128>

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<u128> for picometer

impl Conversion<u16> for picometer

type T = Ratio<u16>

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<u16> for picometer

impl Conversion<u32> for picometer

type T = Ratio<u32>

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<u32> for picometer

impl Conversion<u64> for picometer

type T = Ratio<u64>

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<u64> for picometer

impl Conversion<u8> for picometer

type T = Ratio<u8>

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<u8> for picometer

impl Conversion<usize> for picometer

type T = Ratio<usize>

Conversion factor type specific to the underlying storage type.

fn coefficient() -> Self::T

Coefficient portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the multiplicative identity (Self::T::one()) if no coefficient exists.

fn constant(op: ConstantOp) -> Self::T

Constant portion of conversion factor for converting the given unit to the base unit for the quantity: (value * coefficient()) + constant(). Implementation should return the additive identity (Self::T::zero()) if no constant exists. See ConstantOp documentation for details about parameter use to ensure the method optimizes correctly.

fn into_conversion(&self) -> Self::T where
    Self: Sized, 

Instance conversion factor.

impl Conversion<usize> for picometer

impl Copy for picometer

impl Debug for picometer

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Hash for picometer

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given Hasher.

impl Unit for picometer

impl Unit for picometer

fn abbreviation() -> &'static str

Unit abbreviation.

fn singular() -> &'static str

Unit singular description.

fn plural() -> &'static str

Unit plural description.