Struct wasmer_types::lib::std::mem::ManuallyDrop

pub struct ManuallyDrop<T>
where
    T: ?Sized,
{ /* private fields */ }

Available on crate feature std only.

A wrapper to inhibit the compiler from automatically calling T’s destructor. This wrapper is 0-cost.

ManuallyDrop<T> is guaranteed to have the same layout and bit validity as T, and is subject to the same layout optimizations as T. As a consequence, it has no effect on the assumptions that the compiler makes about its contents. For example, initializing a ManuallyDrop<&mut T> with mem::zeroed is undefined behavior. If you need to handle uninitialized data, use MaybeUninit<T> instead.

Note that accessing the value inside a ManuallyDrop<T> is safe. This means that a ManuallyDrop<T> whose content has been dropped must not be exposed through a public safe API. Correspondingly, ManuallyDrop::drop is unsafe.

ManuallyDrop and drop order.

Rust has a well-defined drop order of values. To make sure that fields or locals are dropped in a specific order, reorder the declarations such that the implicit drop order is the correct one.

It is possible to use ManuallyDrop to control the drop order, but this requires unsafe code and is hard to do correctly in the presence of unwinding.

For example, if you want to make sure that a specific field is dropped after the others, make it the last field of a struct:

struct Context;

struct Widget {
    children: Vec<Widget>,
    // `context` will be dropped after `children`.
    // Rust guarantees that fields are dropped in the order of declaration.
    context: Context,
}

Implementations

impl<T> ManuallyDrop<T>

pub const fn new(value: T) -> ManuallyDrop<T>

Wrap a value to be manually dropped.

Examples

use std::mem::ManuallyDrop;
let mut x = ManuallyDrop::new(String::from("Hello World!"));
x.truncate(5); // You can still safely operate on the value
assert_eq!(*x, "Hello");
// But `Drop` will not be run here

pub const fn into_inner(slot: ManuallyDrop<T>) -> T

Extracts the value from the ManuallyDrop container.

This allows the value to be dropped again.

Examples

use std::mem::ManuallyDrop;
let x = ManuallyDrop::new(Box::new(()));
let _: Box<()> = ManuallyDrop::into_inner(x); // This drops the `Box`.

pub unsafe fn take(slot: &mut ManuallyDrop<T>) -> T

Takes the value from the ManuallyDrop<T> container out.

This method is primarily intended for moving out values in drop. Instead of using ManuallyDrop::drop to manually drop the value, you can use this method to take the value and use it however desired.

Whenever possible, it is preferable to use into_inner instead, which prevents duplicating the content of the ManuallyDrop<T>.

Safety

This function semantically moves out the contained value without preventing further usage, leaving the state of this container unchanged. It is your responsibility to ensure that this ManuallyDrop is not used again.

impl<T> ManuallyDrop<T>

where T: ?Sized,

pub unsafe fn drop(slot: &mut ManuallyDrop<T>)

Manually drops the contained value.

This is exactly equivalent to calling ptr::drop_in_place with a pointer to the contained value. As such, unless the contained value is a packed struct, the destructor will be called in-place without moving the value, and thus can be used to safely drop pinned data.

If you have ownership of the value, you can use ManuallyDrop::into_inner instead.

Safety

This function runs the destructor of the contained value. Other than changes made by the destructor itself, the memory is left unchanged, and so as far as the compiler is concerned still holds a bit-pattern which is valid for the type T.

However, this “zombie” value should not be exposed to safe code, and this function should not be called more than once. To use a value after it’s been dropped, or drop a value multiple times, can cause Undefined Behavior (depending on what drop does). This is normally prevented by the type system, but users of ManuallyDrop must uphold those guarantees without assistance from the compiler.

Trait Implementations

impl<T> Archive for ManuallyDrop<T>

where T: Archive,

type Archived = ManuallyDrop<<T as Archive>::Archived>

The archived representation of this type.

type Resolver = <T as Archive>::Resolver

The resolver for this type. It must contain all the additional information from serializing needed to make the archived type from the normal type.

unsafe fn resolve( &self, pos: usize, resolver: <ManuallyDrop<T> as Archive>::Resolver, out: *mut <ManuallyDrop<T> as Archive>::Archived, )

Creates the archived version of this value at the given position and writes it to the given output.

impl<C, T> CheckBytes<C> for ManuallyDrop<T>

where T: CheckBytes<C> + ?Sized, C: ?Sized,

type Error = <T as CheckBytes<C>>::Error

The error that may result from checking the type.

unsafe fn check_bytes<'a>( value: *const ManuallyDrop<T>, c: &mut C, ) -> Result<&'a ManuallyDrop<T>, <ManuallyDrop<T> as CheckBytes<C>>::Error>

Checks whether the given pointer points to a valid value within the given context.

impl<T> Clone for ManuallyDrop<T>

where T: Clone + ?Sized,

fn clone(&self) -> ManuallyDrop<T>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> Debug for ManuallyDrop<T>

where T: Debug + ?Sized,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Default for ManuallyDrop<T>

where T: Default + ?Sized,

fn default() -> ManuallyDrop<T>

Returns the “default value” for a type.

impl<T> Deref for ManuallyDrop<T>

where T: ?Sized,

type Target = T

The resulting type after dereferencing.

fn deref(&self) -> &T

Dereferences the value.

impl<T> DerefMut for ManuallyDrop<T>

where T: ?Sized,

fn deref_mut(&mut self) -> &mut T

Mutably dereferences the value.

impl<T, D> Deserialize<ManuallyDrop<T>, D> for ManuallyDrop<<T as Archive>::Archived>

where T: Archive, D: Fallible + ?Sized, <T as Archive>::Archived: Deserialize<T, D>,

fn deserialize( &self, deserializer: &mut D, ) -> Result<ManuallyDrop<T>, <D as Fallible>::Error>

Deserializes using the given deserializer

impl<T> Hash for ManuallyDrop<T>

where T: Hash + ?Sized,

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

impl<T> Ord for ManuallyDrop<T>

where T: Ord + ?Sized,

fn cmp(&self, other: &ManuallyDrop<T>) -> Ordering

This method returns an Ordering between self and other.

impl<T> PartialEq for ManuallyDrop<T>

where T: PartialEq + ?Sized,

fn eq(&self, other: &ManuallyDrop<T>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T> PartialOrd for ManuallyDrop<T>

where T: PartialOrd + ?Sized,

fn partial_cmp(&self, other: &ManuallyDrop<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T, S> Serialize<S> for ManuallyDrop<T>

where T: Serialize<S>, S: Fallible + ?Sized,

fn serialize( &self, serializer: &mut S, ) -> Result<<ManuallyDrop<T> as Archive>::Resolver, <S as Fallible>::Error>

Writes the dependencies for the object and returns a resolver that can create the archived type.

impl<T> Copy for ManuallyDrop<T>

where T: Copy + ?Sized,

impl<T> DerefPure for ManuallyDrop<T>

where T: ?Sized,

impl<T> Eq for ManuallyDrop<T>

where T: Eq + ?Sized,

impl<T> StructuralPartialEq for ManuallyDrop<T>

where T: ?Sized,