wasmer_types::lib::std::cmp

Trait PartialEq

1.0.0 · source

pub trait PartialEq<Rhs = Self>where
    Rhs: ?Sized,{
    // Required method
    fn eq(&self, other: &Rhs) -> bool;

    // Provided method
    fn ne(&self, other: &Rhs) -> bool { ... }
}

Available on crate feature std only.

Expand description

Trait for comparisons using the equality operator.

Implementing this trait for types provides the == and != operators for those types.

x.eq(y) can also be written x == y, and x.ne(y) can be written x != y. We use the easier-to-read infix notation in the remainder of this documentation.

This trait allows for comparisons using the equality operator, for types that do not have a full equivalence relation. For example, in floating point numbers NaN != NaN, so floating point types implement PartialEq but not Eq. Formally speaking, when Rhs == Self, this trait corresponds to a partial equivalence relation.

Implementations must ensure that eq and ne are consistent with each other:

a != b if and only if !(a == b).

The default implementation of ne provides this consistency and is almost always sufficient. It should not be overridden without very good reason.

If PartialOrd or Ord are also implemented for Self and Rhs, their methods must also be consistent with PartialEq (see the documentation of those traits for the exact requirements). It’s easy to accidentally make them disagree by deriving some of the traits and manually implementing others.

The equality relation == must satisfy the following conditions (for all a, b, c of type A, B, C):

Symmetry: if A: PartialEq and B: PartialEq<A>, then a == b implies b == a; and
Transitivity: if A: PartialEq and B: PartialEq<C> and A: PartialEq<C>, then a == b and b == c implies a == c. This must also work for longer chains, such as when A: PartialEq, B: PartialEq<C>, C: PartialEq<D>, and A: PartialEq<D> all exist.

Note that the B: PartialEq<A> (symmetric) and A: PartialEq<C> (transitive) impls are not forced to exist, but these requirements apply whenever they do exist.

Violating these requirements is a logic error. The behavior resulting from a logic error is not specified, but users of the trait must ensure that such logic errors do not result in undefined behavior. This means that unsafe code must not rely on the correctness of these methods.

§Cross-crate considerations

Upholding the requirements stated above can become tricky when one crate implements PartialEq for a type of another crate (i.e., to allow comparing one of its own types with a type from the standard library). The recommendation is to never implement this trait for a foreign type. In other words, such a crate should do impl PartialEq<ForeignType> for LocalType, but it should not do impl PartialEq<LocalType> for ForeignType.

This avoids the problem of transitive chains that criss-cross crate boundaries: for all local types T, you may assume that no other crate will add impls that allow comparing T == U. In other words, if other crates add impls that allow building longer transitive chains U1 == ... == T == V1 == ..., then all the types that appear to the right of T must be types that the crate defining T already knows about. This rules out transitive chains where downstream crates can add new impls that “stitch together” comparisons of foreign types in ways that violate transitivity.

Not having such foreign impls also avoids forward compatibility issues where one crate adding more PartialEq implementations can cause build failures in downstream crates.

§Derivable

This trait can be used with #[derive]. When derived on structs, two instances are equal if all fields are equal, and not equal if any fields are not equal. When derived on enums, two instances are equal if they are the same variant and all fields are equal.

§How can I implement `PartialEq`?

An example implementation for a domain in which two books are considered the same book if their ISBN matches, even if the formats differ:

enum BookFormat {
    Paperback,
    Hardback,
    Ebook,
}

struct Book {
    isbn: i32,
    format: BookFormat,
}

impl PartialEq for Book {
    fn eq(&self, other: &Self) -> bool {
        self.isbn == other.isbn
    }
}

let b1 = Book { isbn: 3, format: BookFormat::Paperback };
let b2 = Book { isbn: 3, format: BookFormat::Ebook };
let b3 = Book { isbn: 10, format: BookFormat::Paperback };

assert!(b1 == b2);
assert!(b1 != b3);

§How can I compare two different types?

The type you can compare with is controlled by PartialEq’s type parameter. For example, let’s tweak our previous code a bit:

// The derive implements <BookFormat> == <BookFormat> comparisons
#[derive(PartialEq)]
enum BookFormat {
    Paperback,
    Hardback,
    Ebook,
}

struct Book {
    isbn: i32,
    format: BookFormat,
}

// Implement <Book> == <BookFormat> comparisons
impl PartialEq<BookFormat> for Book {
    fn eq(&self, other: &BookFormat) -> bool {
        self.format == *other
    }
}

// Implement <BookFormat> == <Book> comparisons
impl PartialEq<Book> for BookFormat {
    fn eq(&self, other: &Book) -> bool {
        *self == other.format
    }
}

let b1 = Book { isbn: 3, format: BookFormat::Paperback };

assert!(b1 == BookFormat::Paperback);
assert!(BookFormat::Ebook != b1);

By changing impl PartialEq for Book to impl PartialEq<BookFormat> for Book, we allow BookFormats to be compared with Books.

A comparison like the one above, which ignores some fields of the struct, can be dangerous. It can easily lead to an unintended violation of the requirements for a partial equivalence relation. For example, if we kept the above implementation of PartialEq<Book> for BookFormat and added an implementation of PartialEq<Book> for Book (either via a #[derive] or via the manual implementation from the first example) then the result would violate transitivity:

#[derive(PartialEq)]
enum BookFormat {
    Paperback,
    Hardback,
    Ebook,
}

#[derive(PartialEq)]
struct Book {
    isbn: i32,
    format: BookFormat,
}

impl PartialEq<BookFormat> for Book {
    fn eq(&self, other: &BookFormat) -> bool {
        self.format == *other
    }
}

impl PartialEq<Book> for BookFormat {
    fn eq(&self, other: &Book) -> bool {
        *self == other.format
    }
}

fn main() {
    let b1 = Book { isbn: 1, format: BookFormat::Paperback };
    let b2 = Book { isbn: 2, format: BookFormat::Paperback };

    assert!(b1 == BookFormat::Paperback);
    assert!(BookFormat::Paperback == b2);

    // The following should hold by transitivity but doesn't.
    assert!(b1 == b2); // <-- PANICS
}

§Examples

let x: u32 = 0;
let y: u32 = 1;

assert_eq!(x == y, false);
assert_eq!(x.eq(&y), false);

Required Methods§

1.0.0 · source

fn eq(&self, other: &Rhs) -> bool

Tests for self and other values to be equal, and is used by ==.

Provided Methods§

1.0.0 · source

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

Trait PartialEqCopy item path

§Cross-crate considerations

§Derivable

§How can I implement PartialEq?

§How can I compare two different types?

§Examples

Required Methods§

fn eq(&self, other: &Rhs) -> bool

Provided Methods§

fn ne(&self, other: &Rhs) -> bool

Implementors§

impl PartialEq for RelocationKind

impl PartialEq for RelocationTarget

impl PartialEq for CustomSectionProtection

impl PartialEq for Symbol

impl PartialEq for CpuFeature

impl PartialEq for CompiledFunctionUnwindInfo

impl PartialEq for Aarch64Architecture

impl PartialEq for Architecture

impl PartialEq for BinaryFormat

impl PartialEq for CallingConvention

impl PartialEq for Endianness

impl PartialEq for Environment

impl PartialEq for ExportIndex

impl PartialEq for ExternType

impl PartialEq for GlobalInit

impl PartialEq for HashAlgorithm

impl PartialEq for ImportIndex

impl PartialEq for LibCall

impl PartialEq for MemoryStyle

impl PartialEq for ModuleHash

impl PartialEq for Mutability

impl PartialEq for OperatingSystem

impl PartialEq for PointerWidth

impl PartialEq for TableStyle

impl PartialEq for TrapCode

impl PartialEq for Type

impl PartialEq for Vendor

impl PartialEq for MemoryError

impl PartialEq for Infallible

impl PartialEq for wasmer_types::lib::std::fmt::Alignment

impl PartialEq for wasmer_types::lib::std::sync::atomic::Ordering

impl PartialEq for RecvTimeoutError

impl PartialEq for TryRecvError

impl PartialEq for wasmer_types::lib::std::cmp::Ordering

impl PartialEq for TryReserveErrorKind

impl PartialEq for AsciiChar

impl PartialEq for IpAddr

impl PartialEq for Ipv6MulticastScope

impl PartialEq for SocketAddr

impl PartialEq for FpCategory

impl PartialEq for IntErrorKind

impl PartialEq for SearchStep

impl PartialEq for BacktraceStatus

impl PartialEq for VarError

impl PartialEq for SeekFrom

impl PartialEq for ErrorKind

impl PartialEq for Shutdown

impl PartialEq for BacktraceStyle

impl PartialEq for _Unwind_Action

impl PartialEq for _Unwind_Reason_Code

impl PartialEq for hashbrown::TryReserveError

impl PartialEq for hashbrown::TryReserveError

impl PartialEq for FromHexError

impl PartialEq for Panic

impl PartialEq for ArchivedIpAddr

impl PartialEq for ArchivedSocketAddr

impl PartialEq for CDataModel

impl PartialEq for Size

impl PartialEq for ParseError

impl PartialEq for ArmArchitecture

impl PartialEq for CustomVendor

impl PartialEq for Mips32Architecture

impl PartialEq for Mips64Architecture

impl PartialEq for Riscv32Architecture

impl PartialEq for Riscv64Architecture

impl PartialEq for X86_32Architecture

impl PartialEq for bool

impl PartialEq for char

impl PartialEq for f16

Trait PartialEq

§How can I implement `PartialEq`?