Struct EpollType

pub struct EpollType { /* private fields */ }

Epoll available event types.

Implementations

impl EpollType

pub const EPOLLIN: EpollType = _

The associated file is available for read(2) operations.

pub const EPOLLOUT: EpollType = _

The associated file is available for write(2) operations.

pub const EPOLLRDHUP: EpollType = _

Stream socket peer closed connection, or shut down writing half of connection. (This flag is especially useful for writing simple code to detect peer shutdown when using edge-triggered monitoring.)

pub const EPOLLPRI: EpollType = _

There is an exceptional condition on the file descriptor. See the discussion of POLLPRI in poll(2).

pub const EPOLLERR: EpollType = _

Error condition happened on the associated file descriptor. This event is also reported for the write end of a pipe when the read end has been closed.

pub const EPOLLHUP: EpollType = _

Hang up happened on the associated file descriptor.

pub const EPOLLET: EpollType = _

Requests edge-triggered notification for the associated file descriptor. The default behavior for epoll is level- triggered. See epoll(7) for more detailed information about edge-triggered and level-triggered notification.

pub const EPOLLONESHOT: EpollType = _

Requests one-shot notification for the associated file descriptor. This means that after an event notified for the file descriptor by epoll_wait(2), the file descriptor is disabled in the interest list and no other events will be reported by the epoll interface. The user must call epoll_ctl() with EPOLL_CTL_MOD to rearm the file descriptor with a new event mask.

pub const fn empty() -> EpollType

Returns an empty set of flags.

pub const fn all() -> EpollType

Returns the set containing all flags.

pub const fn bits(&self) -> u32

Returns the raw value of the flags currently stored.

pub const fn from_bits(bits: u32) -> Option<EpollType>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: u32) -> EpollType

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: u32) -> EpollType

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: EpollType) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: EpollType) -> bool

Returns true if all of the flags in other are contained within self.

pub fn insert(&mut self, other: EpollType)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: EpollType)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: EpollType)

Toggles the specified flags in-place.

pub fn set(&mut self, other: EpollType, value: bool)

Inserts or removes the specified flags depending on the passed value.

pub const fn intersection(self, other: EpollType) -> EpollType

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

pub const fn union(self, other: EpollType) -> EpollType

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

pub const fn difference(self, other: EpollType) -> EpollType

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

pub const fn symmetric_difference(self, other: EpollType) -> EpollType

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

pub const fn complement(self) -> EpollType

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

Trait Implementations

impl Binary for EpollType

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl BitAnd for EpollType

fn bitand(self, other: EpollType) -> EpollType

Returns the intersection between the two sets of flags.

type Output = EpollType

The resulting type after applying the & operator.

impl BitAndAssign for EpollType

fn bitand_assign(&mut self, other: EpollType)

Disables all flags disabled in the set.

impl BitOr for EpollType

fn bitor(self, other: EpollType) -> EpollType

Returns the union of the two sets of flags.

type Output = EpollType

The resulting type after applying the | operator.

impl BitOrAssign for EpollType

fn bitor_assign(&mut self, other: EpollType)

Adds the set of flags.

impl BitXor for EpollType

fn bitxor(self, other: EpollType) -> EpollType

Returns the left flags, but with all the right flags toggled.

type Output = EpollType

The resulting type after applying the ^ operator.

impl BitXorAssign for EpollType

fn bitxor_assign(&mut self, other: EpollType)

Toggles the set of flags.

impl Clone for EpollType

fn clone(&self) -> EpollType

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for EpollType

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<'de> Deserialize<'de> for EpollType

fn deserialize<__D>( __deserializer: __D, ) -> Result<EpollType, <__D as Deserializer<'de>>::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Extend<EpollType> for EpollType

fn extend<T>(&mut self, iterator: T)

where T: IntoIterator<Item = EpollType>,

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FromIterator<EpollType> for EpollType

fn from_iter<T>(iterator: T) -> EpollType

where T: IntoIterator<Item = EpollType>,

Creates a value from an iterator.

impl Hash for EpollType

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl LowerHex for EpollType

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Not for EpollType

fn not(self) -> EpollType

Returns the complement of this set of flags.

type Output = EpollType

The resulting type after applying the ! operator.

impl Octal for EpollType

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Ord for EpollType

fn cmp(&self, other: &EpollType) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for EpollType

fn eq(&self, other: &EpollType) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for EpollType

fn partial_cmp(&self, other: &EpollType) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Serialize for EpollType

fn serialize<__S>( &self, __serializer: __S, ) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl Sub for EpollType

fn sub(self, other: EpollType) -> EpollType

Returns the set difference of the two sets of flags.

type Output = EpollType

The resulting type after applying the - operator.

impl SubAssign for EpollType

fn sub_assign(&mut self, other: EpollType)

Disables all flags enabled in the set.

impl UpperHex for EpollType

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl ValueType for EpollType

fn zero_padding_bytes(&self, _bytes: &mut [MaybeUninit<u8>])

This method is passed a byte slice which contains the byte representation of self. It must zero out any bytes which are uninitialized (e.g. padding bytes).

impl Copy for EpollType

impl Eq for EpollType

impl StructuralPartialEq for EpollType