Struct wasmer_wasix::Pipe

pub struct Pipe { /* private fields */ }

Implementations

impl Pipe

pub fn channel() -> (Pipe, Pipe)

pub fn split(self) -> (PipeTx, PipeRx)

pub fn combine(tx: PipeTx, rx: PipeRx) -> Pipe

impl Pipe

pub fn with_blocking(self, block: bool) -> Pipe

Same as set_blocking, but as a builder method

pub fn set_blocking(&mut self, block: bool)

Whether to block on reads (ususally for waiting for stdin keyboard input). Default: true

pub fn close(&self)

Trait Implementations

impl AsyncRead for Pipe

fn poll_read( self: Pin<&mut Pipe>, cx: &mut Context<'_>, buf: &mut ReadBuf<'_> ) -> Poll<Result<(), Error>>

Attempts to read from the AsyncRead into buf.

impl AsyncSeek for Pipe

fn start_seek(self: Pin<&mut Pipe>, position: SeekFrom) -> Result<(), Error>

Attempts to seek to an offset, in bytes, in a stream.

fn poll_complete( self: Pin<&mut Pipe>, cx: &mut Context<'_> ) -> Poll<Result<u64, Error>>

Waits for a seek operation to complete.

impl AsyncWrite for Pipe

fn poll_write( self: Pin<&mut Pipe>, cx: &mut Context<'_>, buf: &[u8] ) -> Poll<Result<usize, Error>>

Attempt to write bytes from buf into the object.

fn poll_flush( self: Pin<&mut Pipe>, cx: &mut Context<'_> ) -> Poll<Result<(), Error>>

Attempts to flush the object, ensuring that any buffered data reach their destination.

fn poll_shutdown( self: Pin<&mut Pipe>, cx: &mut Context<'_> ) -> Poll<Result<(), Error>>

Initiates or attempts to shut down this writer, returning success when the I/O connection has completely shut down.

fn poll_write_vectored( self: Pin<&mut Pipe>, cx: &mut Context<'_>, bufs: &[IoSlice<'_>] ) -> Poll<Result<usize, Error>>

Like poll_write, except that it writes from a slice of buffers.

fn is_write_vectored(&self) -> bool

Determines if this writer has an efficient poll_write_vectored implementation.

impl Clone for Pipe

fn clone(&self) -> Pipe

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Pipe

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Read for Pipe

fn read(&mut self, buf: &mut [u8]) -> Result<usize, Error>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize, Error>

Like read, except that it reads into a slice of buffers.

fn is_read_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector)

Determines if this Reader has an efficient read_vectored implementation.

fn read_to_end(&mut self, buf: &mut Vec<u8, Global>) -> Result<usize, Error>

Read all bytes until EOF in this source, placing them into buf.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until EOF in this source, appending them to buf.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

Read the exact number of bytes required to fill buf.

fn read_buf(&mut self, buf: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)

Pull some bytes from this source into the specified buffer.

fn read_buf_exact(&mut self, cursor: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)

Read the exact number of bytes required to fill cursor.

fn by_ref(&mut self) -> &mut Selfwhere Self: Sized,

Creates a “by reference” adaptor for this instance of Read.

fn bytes(self) -> Bytes<Self>where Self: Sized,

Transforms this Read instance to an Iterator over its bytes.

fn chain<R>(self, next: R) -> Chain<Self, R>where R: Read, Self: Sized,

Creates an adapter which will chain this stream with another.

fn take(self, limit: u64) -> Take<Self>where Self: Sized,

Creates an adapter which will read at most limit bytes from it.

impl Seek for Pipe

fn seek(&mut self, from: SeekFrom) -> Result<u64, Error>

Seek to an offset, in bytes, in a stream.

fn rewind(&mut self) -> Result<(), Error>

Rewind to the beginning of a stream.

fn stream_len(&mut self) -> Result<u64, Error>

🔬This is a nightly-only experimental API. (seek_stream_len)

Returns the length of this stream (in bytes).

fn stream_position(&mut self) -> Result<u64, Error>

Returns the current seek position from the start of the stream.

impl VirtualFile for Pipe

fn last_accessed(&self) -> u64

the last time the file was accessed in nanoseconds as a UNIX timestamp

fn last_modified(&self) -> u64

the last time the file was modified in nanoseconds as a UNIX timestamp

fn created_time(&self) -> u64

the time at which the file was created in nanoseconds as a UNIX timestamp

fn size(&self) -> u64

the size of the file in bytes

fn set_len(&mut self, _new_size: u64) -> Result<(), FsError>

Change the size of the file, if the new_size is greater than the current size the extra bytes will be allocated and zeroed

fn unlink( &mut self ) -> Pin<Box<dyn Future<Output = Result<(), FsError>> + Send, Global>>

Request deletion of the file

fn is_open(&self) -> bool

Indicates if the file is opened or closed. This function must not block Defaults to a status of being constantly open

fn poll_read_ready( self: Pin<&mut Pipe>, cx: &mut Context<'_> ) -> Poll<Result<usize, Error>>

Polls the file for when there is data to be read

fn poll_write_ready( self: Pin<&mut Pipe>, _cx: &mut Context<'_> ) -> Poll<Result<usize, Error>>

Polls the file for when it is available for writing

fn get_special_fd(&self) -> Option<u32>

Used for “special” files such as stdin, stdout and stderr. Always returns the same file descriptor (0, 1 or 2). Returns None on normal files

fn copy_reference( &mut self, src: Box<dyn VirtualFile + Sync + Send, Global> ) -> Pin<Box<dyn Future<Output = Result<(), Error>> + Send + '_, Global>>

This method will copy a file from a source to this destination where the default is to do a straight byte copy however file system implementors may optimize this to do a zero copy

impl Write for Pipe

fn write(&mut self, buf: &[u8]) -> Result<usize, Error>

Write a buffer into this writer, returning how many bytes were written.

fn flush(&mut self) -> Result<(), Error>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination.

fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>

Attempts to write an entire buffer into this writer.

fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<(), Error>

Writes a formatted string into this writer, returning any error encountered.

fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize, Error>

Like write, except that it writes from a slice of buffers.

fn is_write_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector)

Determines if this Writer has an efficient write_vectored implementation.

fn write_all_vectored(&mut self, bufs: &mut [IoSlice<'_>]) -> Result<(), Error>

🔬This is a nightly-only experimental API. (write_all_vectored)

Attempts to write multiple buffers into this writer.

fn by_ref(&mut self) -> &mut Selfwhere Self: Sized,

Creates a “by reference” adapter for this instance of Write.