Struct wayland_client::wayland::compositor::WlSurface
[−]
[src]
pub struct WlSurface {
// some fields omitted
}an onscreen surface
A surface is a rectangular area that is displayed on the screen. It has a location, size and pixel contents.
The size of a surface (and relative positions on it) is described in surface local coordinates, which may differ from the buffer local coordinates of the pixel content, in case a buffer_transform or a buffer_scale is used.
A surface without a "role" is fairly useless, a compositor does not know where, when or how to present it. The role is the purpose of a wl_surface. Examples of roles are a cursor for a pointer (as set by wl_pointer.set_cursor), a drag icon (wl_data_device.start_drag), a sub-surface (wl_subcompositor.get_subsurface), and a window as defined by a shell protocol (e.g. wl_shell.get_shell_surface).
A surface can have only one role at a time. Initially a wl_surface does not have a role. Once a wl_surface is given a role, it is set permanently for the whole lifetime of the wl_surface object. Giving the current role again is allowed, unless explicitly forbidden by the relevant interface specification.
Surface roles are given by requests in other interfaces such as wl_pointer.set_cursor. The request should explicitly mention that this request gives a role to a wl_surface. Often, this request also creates a new protocol object that represents the role and adds additional functionality to wl_surface. When a client wants to destroy a wl_surface, they must destroy this 'role object' before the wl_surface.
Destroying the role object does not remove the role from the wl_surface, but it may stop the wl_surface from "playing the role". For instance, if a wl_subsurface object is destroyed, the wl_surface it was created for will be unmapped and forget its position and z-order. It is allowed to create a wl_subsurface for the same wl_surface again, but it is not allowed to use the wl_surface as a cursor (cursor is a different role than sub-surface, and role switching is not allowed).
Methods
impl WlSurface[src]
fn destroy(self)
delete surface
Deletes the surface and invalidates its object ID.
fn attach(&self, buffer: Option<&WlBuffer>, x: i32, y: i32)
set the surface contents
Set a buffer as the content of this surface.
The new size of the surface is calculated based on the buffer size transformed by the inverse buffer_transform and the inverse buffer_scale. This means that the supplied buffer must be an integer multiple of the buffer_scale.
The x and y arguments specify the location of the new pending buffer's upper left corner, relative to the current buffer's upper left corner, in surface local coordinates. In other words, the x and y, combined with the new surface size define in which directions the surface's size changes.
Surface contents are double-buffered state, see wl_surface.commit.
The initial surface contents are void; there is no content. wl_surface.attach assigns the given wl_buffer as the pending wl_buffer. wl_surface.commit makes the pending wl_buffer the new surface contents, and the size of the surface becomes the size calculated from the wl_buffer, as described above. After commit, there is no pending buffer until the next attach.
Committing a pending wl_buffer allows the compositor to read the pixels in the wl_buffer. The compositor may access the pixels at any time after the wl_surface.commit request. When the compositor will not access the pixels anymore, it will send the wl_buffer.release event. Only after receiving wl_buffer.release, the client may re-use the wl_buffer. A wl_buffer that has been attached and then replaced by another attach instead of committed will not receive a release event, and is not used by the compositor.
Destroying the wl_buffer after wl_buffer.release does not change the surface contents. However, if the client destroys the wl_buffer before receiving the wl_buffer.release event, the surface contents become undefined immediately.
If wl_surface.attach is sent with a NULL wl_buffer, the following wl_surface.commit will remove the surface content.
fn damage(&self, x: i32, y: i32, width: i32, height: i32)
mark part of the surface damaged
This request is used to describe the regions where the pending buffer is different from the current surface contents, and where the surface therefore needs to be repainted. The pending buffer must be set by wl_surface.attach before sending damage. The compositor ignores the parts of the damage that fall outside of the surface.
Damage is double-buffered state, see wl_surface.commit.
The damage rectangle is specified in surface local coordinates.
The initial value for pending damage is empty: no damage. wl_surface.damage adds pending damage: the new pending damage is the union of old pending damage and the given rectangle.
wl_surface.commit assigns pending damage as the current damage, and clears pending damage. The server will clear the current damage as it repaints the surface.
fn frame(&self) -> WlCallback
request a frame throttling hint
Request a notification when it is a good time start drawing a new frame, by creating a frame callback. This is useful for throttling redrawing operations, and driving animations.
When a client is animating on a wl_surface, it can use the 'frame' request to get notified when it is a good time to draw and commit the next frame of animation. If the client commits an update earlier than that, it is likely that some updates will not make it to the display, and the client is wasting resources by drawing too often.
The frame request will take effect on the next wl_surface.commit. The notification will only be posted for one frame unless requested again. For a wl_surface, the notifications are posted in the order the frame requests were committed.
The server must send the notifications so that a client will not send excessive updates, while still allowing the highest possible update rate for clients that wait for the reply before drawing again. The server should give some time for the client to draw and commit after sending the frame callback events to let them hit the next output refresh.
A server should avoid signalling the frame callbacks if the surface is not visible in any way, e.g. the surface is off-screen, or completely obscured by other opaque surfaces.
The object returned by this request will be destroyed by the compositor after the callback is fired and as such the client must not attempt to use it after that point.
The callback_data passed in the callback is the current time, in milliseconds, with an undefined base.
fn set_opaque_region(&self, region: Option<&WlRegion>)
set opaque region
This request sets the region of the surface that contains opaque content.
The opaque region is an optimization hint for the compositor that lets it optimize out redrawing of content behind opaque regions. Setting an opaque region is not required for correct behaviour, but marking transparent content as opaque will result in repaint artifacts.
The opaque region is specified in surface local coordinates.
The compositor ignores the parts of the opaque region that fall outside of the surface.
Opaque region is double-buffered state, see wl_surface.commit.
wl_surface.set_opaque_region changes the pending opaque region. wl_surface.commit copies the pending region to the current region. Otherwise, the pending and current regions are never changed.
The initial value for opaque region is empty. Setting the pending opaque region has copy semantics, and the wl_region object can be destroyed immediately. A NULL wl_region causes the pending opaque region to be set to empty.
fn set_input_region(&self, region: Option<&WlRegion>)
set input region
This request sets the region of the surface that can receive pointer and touch events.
Input events happening outside of this region will try the next surface in the server surface stack. The compositor ignores the parts of the input region that fall outside of the surface.
The input region is specified in surface local coordinates.
Input region is double-buffered state, see wl_surface.commit.
wl_surface.set_input_region changes the pending input region. wl_surface.commit copies the pending region to the current region. Otherwise the pending and current regions are never changed, except cursor and icon surfaces are special cases, see wl_pointer.set_cursor and wl_data_device.start_drag.
The initial value for input region is infinite. That means the whole surface will accept input. Setting the pending input region has copy semantics, and the wl_region object can be destroyed immediately. A NULL wl_region causes the input region to be set to infinite.
fn commit(&self)
commit pending surface state
Surface state (input, opaque, and damage regions, attached buffers, etc.) is double-buffered. Protocol requests modify the pending state, as opposed to current state in use by the compositor. Commit request atomically applies all pending state, replacing the current state. After commit, the new pending state is as documented for each related request.
On commit, a pending wl_buffer is applied first, all other state second. This means that all coordinates in double-buffered state are relative to the new wl_buffer coming into use, except for wl_surface.attach itself. If there is no pending wl_buffer, the coordinates are relative to the current surface contents.
All requests that need a commit to become effective are documented to affect double-buffered state.
Other interfaces may add further double-buffered surface state.
fn set_buffer_transform(&self, transform: i32)
sets the buffer transformation
This request sets an optional transformation on how the compositor interprets the contents of the buffer attached to the surface. The accepted values for the transform parameter are the values for wl_output.transform.
Buffer transform is double-buffered state, see wl_surface.commit.
A newly created surface has its buffer transformation set to normal.
wl_surface.set_buffer_transform changes the pending buffer transformation. wl_surface.commit copies the pending buffer transformation to the current one. Otherwise, the pending and current values are never changed.
The purpose of this request is to allow clients to render content according to the output transform, thus permiting the compositor to use certain optimizations even if the display is rotated. Using hardware overlays and scanning out a client buffer for fullscreen surfaces are examples of such optimizations. Those optimizations are highly dependent on the compositor implementation, so the use of this request should be considered on a case-by-case basis.
Note that if the transform value includes 90 or 270 degree rotation, the width of the buffer will become the surface height and the height of the buffer will become the surface width.
If transform is not one of the values from the wl_output.transform enum the invalid_transform protocol error is raised.
Requires interface version >= 2.
fn set_buffer_scale(&self, scale: i32)
sets the buffer scaling factor
This request sets an optional scaling factor on how the compositor interprets the contents of the buffer attached to the window.
Buffer scale is double-buffered state, see wl_surface.commit.
A newly created surface has its buffer scale set to 1.
wl_surface.set_buffer_scale changes the pending buffer scale. wl_surface.commit copies the pending buffer scale to the current one. Otherwise, the pending and current values are never changed.
The purpose of this request is to allow clients to supply higher resolution buffer data for use on high resolution outputs. Its intended that you pick the same buffer scale as the scale of the output that the surface is displayed on.This means the compositor can avoid scaling when rendering the surface on that output.
Note that if the scale is larger than 1, then you have to attach a buffer that is larger (by a factor of scale in each dimension) than the desired surface size.
If scale is not positive the invalid_scale protocol error is raised.
Requires interface version >= 3.
Trait Implementations
impl Sync for WlSurface[src]
impl Send for WlSurface[src]
impl Proxy for WlSurface[src]
fn ptr(&self) -> *mut wl_proxy
fn interface() -> *mut wl_interface
fn interface_name() -> &'static str
The internal name of this interface, as advertized by the registry if it is a global.
fn version() -> u32
The maximum version of this interface handled by the library.
fn id(&self) -> ProxyId
Get the id of this proxy
unsafe fn from_ptr(ptr: *mut wl_proxy) -> WlSurface
Creates a proxy from a fresh ptr
unsafe fn from_ptr_no_own(ptr: *mut wl_proxy) -> WlSurface
Creates a proxy from a ptr that is managed elsewhere Read more
fn set_evt_iterator(&mut self, evt: &EventIterator)
Set the event iterator associated to this proxy
impl Debug for WlSurface[src]
fn fmt(&self, fmt: &mut Formatter) -> Result<(), Error>
Formats the value using the given formatter.