Struct wayland_protocols_wlr::screencopy::v1::server::zwlr_screencopy_frame_v1::ZwlrScreencopyFrameV1

pub struct ZwlrScreencopyFrameV1 { /* private fields */ }

Available on crate feature server only.

a frame ready for copy

This object represents a single frame.

When created, a series of buffer events will be sent, each representing a supported buffer type. The “buffer_done” event is sent afterwards to indicate that all supported buffer types have been enumerated. The client will then be able to send a “copy” request. If the capture is successful, the compositor will send a “flags” followed by a “ready” event.

For objects version 2 or lower, wl_shm buffers are always supported, ie. the “buffer” event is guaranteed to be sent.

If the capture failed, the “failed” event is sent. This can happen anytime before the “ready” event.

Once either a “ready” or a “failed” event is received, the client should destroy the frame.

See also the Request enum for this interface.

Implementations

impl ZwlrScreencopyFrameV1

pub fn buffer(&self, format: Format, width: u32, height: u32, stride: u32)

wl_shm buffer information

Provides information about wl_shm buffer parameters that need to be used for this frame. This event is sent once after the frame is created if wl_shm buffers are supported.

pub fn flags(&self, flags: Flags)

frame flags

Provides flags about the frame. This event is sent once before the “ready” event.

pub fn ready(&self, tv_sec_hi: u32, tv_sec_lo: u32, tv_nsec: u32)

indicates frame is available for reading

Called as soon as the frame is copied, indicating it is available for reading. This event includes the time at which presentation happened at.

The timestamp is expressed as tv_sec_hi, tv_sec_lo, tv_nsec triples, each component being an unsigned 32-bit value. Whole seconds are in tv_sec which is a 64-bit value combined from tv_sec_hi and tv_sec_lo, and the additional fractional part in tv_nsec as nanoseconds. Hence, for valid timestamps tv_nsec must be in [0, 999999999]. The seconds part may have an arbitrary offset at start.

After receiving this event, the client should destroy the object.

pub fn failed(&self)

frame copy failed

This event indicates that the attempted frame copy has failed.

After receiving this event, the client should destroy the object.

pub fn damage(&self, x: u32, y: u32, width: u32, height: u32)

carries the coordinates of the damaged region

This event is sent right before the ready event when copy_with_damage is requested. It may be generated multiple times for each copy_with_damage request.

The arguments describe a box around an area that has changed since the last copy request that was derived from the current screencopy manager instance.

The union of all regions received between the call to copy_with_damage and a ready event is the total damage since the prior ready event.

pub fn linux_dmabuf(&self, format: u32, width: u32, height: u32)

linux-dmabuf buffer information

Provides information about linux-dmabuf buffer parameters that need to be used for this frame. This event is sent once after the frame is created if linux-dmabuf buffers are supported.

pub fn buffer_done(&self)

all buffer types reported

This event is sent once after all buffer events have been sent.

The client should proceed to create a buffer of one of the supported types, and send a “copy” request.

Trait Implementations

impl Borrow<ObjectId> for ZwlrScreencopyFrameV1

fn borrow(&self) -> &ObjectId

Immutably borrows from an owned value.

impl Clone for ZwlrScreencopyFrameV1

fn clone(&self) -> ZwlrScreencopyFrameV1

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ZwlrScreencopyFrameV1

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Hash for ZwlrScreencopyFrameV1

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl PartialEq<Weak<ZwlrScreencopyFrameV1>> for ZwlrScreencopyFrameV1

fn eq(&self, other: &Weak<ZwlrScreencopyFrameV1>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<ZwlrScreencopyFrameV1> for ZwlrScreencopyFrameV1

fn eq(&self, other: &ZwlrScreencopyFrameV1) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Resource for ZwlrScreencopyFrameV1

type Request = Request

The request enum for this interface

type Event<'event> = Event<'event>

The event enum for this interface

fn interface() -> &'static Interface

The interface description

fn id(&self) -> ObjectId

The ID of this object

fn version(&self) -> u32

The version of this object

fn data<U: 'static>(&self) -> Option<&U>

Access the user-data associated with this object

fn object_data(&self) -> Option<&Arc<dyn Any + Send + Sync>>

Access the raw data associated with this object.

fn handle(&self) -> &WeakHandle

Access the backend handle associated with this object

fn from_id(conn: &DisplayHandle, id: ObjectId) -> Result<Self, InvalidId>

Create an object resource from its ID

fn send_event(&self, evt: Self::Event<'_>) -> Result<(), InvalidId>

Send an event to this object

fn parse_request( conn: &DisplayHandle, msg: Message<ObjectId, OwnedFd> ) -> Result<(Self, Self::Request), DispatchError>

Parse a event for this object

fn write_event<'a>( &self, conn: &DisplayHandle, msg: Self::Event<'a> ) -> Result<Message<ObjectId, BorrowedFd<'a>>, InvalidId>

Serialize an event for this object

fn client(&self) -> Option<Client>

The client owning this object

fn is_alive(&self) -> bool

Checks if the Wayland object associated with this proxy is still alive

fn post_error(&self, code: impl Into<u32>, error: impl Into<String>)

Trigger a protocol error on this object

fn downgrade(&self) -> Weak<Self>

Creates a weak handle to this object

impl Eq for ZwlrScreencopyFrameV1