[−]Struct wayland_protocols::unstable::xdg_shell::v6::client::zxdg_positioner_v6::ConstraintAdjustment

pub struct ConstraintAdjustment { /* fields omitted */ }

constraint adjustments

The constraint adjustment value define ways the compositor will adjust the position of the surface, if the unadjusted position would result in the surface being partly constrained.

Whether a surface is considered 'constrained' is left to the compositor to determine. For example, the surface may be partly outside the compositor's defined 'work area', thus necessitating the child surface's position be adjusted until it is entirely inside the work area.

The adjustments can be combined, according to a defined precedence: 1) Flip, 2) Slide, 3) Resize.

Methods

`impl ConstraintAdjustment`

`pub const None: ConstraintAdjustment`

don't move the child surface when constrained

Don't alter the surface position even if it is constrained on some axis, for example partially outside the edge of a monitor.

`pub const SlideX: ConstraintAdjustment`

move along the x axis until unconstrained

Slide the surface along the x axis until it is no longer constrained.

First try to slide towards the direction of the gravity on the x axis until either the edge in the opposite direction of the gravity is unconstrained or the edge in the direction of the gravity is constrained.

Then try to slide towards the opposite direction of the gravity on the x axis until either the edge in the direction of the gravity is unconstrained or the edge in the opposite direction of the gravity is constrained.

`pub const SlideY: ConstraintAdjustment`

move along the y axis until unconstrained

Slide the surface along the y axis until it is no longer constrained.

First try to slide towards the direction of the gravity on the y axis until either the edge in the opposite direction of the gravity is unconstrained or the edge in the direction of the gravity is constrained.

Then try to slide towards the opposite direction of the gravity on the y axis until either the edge in the direction of the gravity is unconstrained or the edge in the opposite direction of the gravity is constrained.

`pub const FlipX: ConstraintAdjustment`

invert the anchor and gravity on the x axis

Invert the anchor and gravity on the x axis if the surface is constrained on the x axis. For example, if the left edge of the surface is constrained, the gravity is 'left' and the anchor is 'left', change the gravity to 'right' and the anchor to 'right'.

If the adjusted position also ends up being constrained, the resulting position of the flip_x adjustment will be the one before the adjustment.

`pub const FlipY: ConstraintAdjustment`

invert the anchor and gravity on the y axis

Invert the anchor and gravity on the y axis if the surface is constrained on the y axis. For example, if the bottom edge of the surface is constrained, the gravity is 'bottom' and the anchor is 'bottom', change the gravity to 'top' and the anchor to 'top'.

If the adjusted position also ends up being constrained, the resulting position of the flip_y adjustment will be the one before the adjustment.