Struct webrtc_data::data_channel::PollDataChannel

impl PollDataChannel

pub fn new(data_channel: Arc<DataChannel>) -> Self

Constructs a new PollDataChannel.

§Examples

use webrtc_data::data_channel::{DataChannel, PollDataChannel, Config};
use sctp::stream::Stream;
use std::sync::Arc;

let dc = Arc::new(DataChannel::new(Arc::new(Stream::default()), Config::default()));
let poll_dc = PollDataChannel::new(dc);

pub fn into_inner(self) -> Arc<DataChannel>

Get back the inner data_channel.

pub fn clone_inner(&self) -> Arc<DataChannel>

Obtain a clone of the inner data_channel.

pub fn messages_sent(&self) -> usize

MessagesSent returns the number of messages sent

pub fn messages_received(&self) -> usize

MessagesReceived returns the number of messages received

pub fn bytes_sent(&self) -> usize

BytesSent returns the number of bytes sent

pub fn bytes_received(&self) -> usize

BytesReceived returns the number of bytes received

pub fn stream_identifier(&self) -> u16

StreamIdentifier returns the Stream identifier associated to the stream.

pub fn buffered_amount(&self) -> usize

BufferedAmount returns the number of bytes of data currently queued to be sent over this stream.

pub fn buffered_amount_low_threshold(&self) -> usize

BufferedAmountLowThreshold returns the number of bytes of buffered outgoing data that is considered “low.” Defaults to 0.

pub fn set_read_buf_capacity(&mut self, capacity: usize)

Set the capacity of the temporary read buffer (default: 8192).

Trait Implementations§

impl AsRef<DataChannel> for PollDataChannel

fn as_ref(&self) -> &DataChannel

Converts this type into a shared reference of the (usually inferred) input type.

impl AsyncRead for PollDataChannel

fn poll_read( self: Pin<&mut Self>, cx: &mut Context<'_>, buf: &mut ReadBuf<'_> ) -> Poll<Result<()>>

Attempts to read from the AsyncRead into buf. Read more

impl AsyncWrite for PollDataChannel

fn poll_write( self: Pin<&mut Self>, cx: &mut Context<'_>, buf: &[u8] ) -> Poll<Result<usize>>

Attempt to write bytes from buf into the object. Read more

fn poll_flush(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<()>>

Attempts to flush the object, ensuring that any buffered data reach their destination. Read more

fn poll_shutdown(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<()>>

Initiates or attempts to shut down this writer, returning success when the I/O connection has completely shut down. Read more

fn poll_write_vectored( self: Pin<&mut Self>, cx: &mut Context<'_>, bufs: &[IoSlice<'_>] ) -> Poll<Result<usize, Error>>

Like poll_write, except that it writes from a slice of buffers. Read more

fn is_write_vectored(&self) -> bool

Determines if this writer has an efficient poll_write_vectored implementation. Read more

impl Clone for PollDataChannel

fn clone(&self) -> PollDataChannel

Returns a copy of the value. Read more

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for PollDataChannel

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

impl !UnwindSafe for PollDataChannel

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<R> AsyncReadExt for R
where R: AsyncRead + ?Sized,

fn chain<R>(self, next: R) -> Chain<Self, R>
where Self: Sized, R: AsyncRead,

Creates a new AsyncRead instance that chains this stream with next. Read more

fn read<'a>(&'a mut self, buf: &'a mut [u8]) -> Read<'a, Self>
where Self: Unpin,

Pulls some bytes from this source into the specified buffer, returning how many bytes were read. Read more

fn read_buf<'a, B>(&'a mut self, buf: &'a mut B) -> ReadBuf<'a, Self, B>
where Self: Unpin, B: BufMut + ?Sized,

Pulls some bytes from this source into the specified buffer, advancing the buffer’s internal cursor. Read more

fn read_exact<'a>(&'a mut self, buf: &'a mut [u8]) -> ReadExact<'a, Self>
where Self: Unpin,

Reads the exact number of bytes required to fill buf. Read more

fn read_u8(&mut self) -> ReadU8<&mut Self>
where Self: Unpin,

Reads an unsigned 8 bit integer from the underlying reader. Read more

fn read_i8(&mut self) -> ReadI8<&mut Self>
where Self: Unpin,

Reads a signed 8 bit integer from the underlying reader. Read more

fn read_u16(&mut self) -> ReadU16<&mut Self>
where Self: Unpin,

Reads an unsigned 16-bit integer in big-endian order from the underlying reader. Read more

fn read_i16(&mut self) -> ReadI16<&mut Self>
where Self: Unpin,

Reads a signed 16-bit integer in big-endian order from the underlying reader. Read more

fn read_u32(&mut self) -> ReadU32<&mut Self>
where Self: Unpin,

Reads an unsigned 32-bit integer in big-endian order from the underlying reader. Read more

fn read_i32(&mut self) -> ReadI32<&mut Self>
where Self: Unpin,

Reads a signed 32-bit integer in big-endian order from the underlying reader. Read more

fn read_u64(&mut self) -> ReadU64<&mut Self>
where Self: Unpin,

Reads an unsigned 64-bit integer in big-endian order from the underlying reader. Read more

fn read_i64(&mut self) -> ReadI64<&mut Self>
where Self: Unpin,

Reads an signed 64-bit integer in big-endian order from the underlying reader. Read more

fn read_u128(&mut self) -> ReadU128<&mut Self>
where Self: Unpin,

Reads an unsigned 128-bit integer in big-endian order from the underlying reader. Read more

fn read_i128(&mut self) -> ReadI128<&mut Self>
where Self: Unpin,

Reads an signed 128-bit integer in big-endian order from the underlying reader. Read more

fn read_f32(&mut self) -> ReadF32<&mut Self>
where Self: Unpin,

Reads an 32-bit floating point type in big-endian order from the underlying reader. Read more

fn read_f64(&mut self) -> ReadF64<&mut Self>
where Self: Unpin,

Reads an 64-bit floating point type in big-endian order from the underlying reader. Read more

fn read_u16_le(&mut self) -> ReadU16Le<&mut Self>
where Self: Unpin,

Reads an unsigned 16-bit integer in little-endian order from the underlying reader. Read more

fn read_i16_le(&mut self) -> ReadI16Le<&mut Self>
where Self: Unpin,

Reads a signed 16-bit integer in little-endian order from the underlying reader. Read more

fn read_u32_le(&mut self) -> ReadU32Le<&mut Self>
where Self: Unpin,

Reads an unsigned 32-bit integer in little-endian order from the underlying reader. Read more

fn read_i32_le(&mut self) -> ReadI32Le<&mut Self>
where Self: Unpin,

Reads a signed 32-bit integer in little-endian order from the underlying reader. Read more

fn read_u64_le(&mut self) -> ReadU64Le<&mut Self>
where Self: Unpin,

Reads an unsigned 64-bit integer in little-endian order from the underlying reader. Read more

fn read_i64_le(&mut self) -> ReadI64Le<&mut Self>
where Self: Unpin,

Reads an signed 64-bit integer in little-endian order from the underlying reader. Read more

fn read_u128_le(&mut self) -> ReadU128Le<&mut Self>
where Self: Unpin,

Reads an unsigned 128-bit integer in little-endian order from the underlying reader. Read more

fn read_i128_le(&mut self) -> ReadI128Le<&mut Self>
where Self: Unpin,

Reads an signed 128-bit integer in little-endian order from the underlying reader. Read more

fn read_f32_le(&mut self) -> ReadF32Le<&mut Self>
where Self: Unpin,

Reads an 32-bit floating point type in little-endian order from the underlying reader. Read more

fn read_f64_le(&mut self) -> ReadF64Le<&mut Self>
where Self: Unpin,

Reads an 64-bit floating point type in little-endian order from the underlying reader. Read more

fn read_to_end<'a>(&'a mut self, buf: &'a mut Vec<u8>) -> ReadToEnd<'a, Self>
where Self: Unpin,

Reads all bytes until EOF in this source, placing them into buf. Read more

fn read_to_string<'a>( &'a mut self, dst: &'a mut String ) -> ReadToString<'a, Self>
where Self: Unpin,

Reads all bytes until EOF in this source, appending them to buf. Read more

fn take(self, limit: u64) -> Take<Self>
where Self: Sized,

Creates an adaptor which reads at most limit bytes from it. Read more

impl<W> AsyncWriteExt for W
where W: AsyncWrite + ?Sized,

fn write<'a>(&'a mut self, src: &'a [u8]) -> Write<'a, Self>
where Self: Unpin,

Writes a buffer into this writer, returning how many bytes were written. Read more

fn write_vectored<'a, 'b>( &'a mut self, bufs: &'a [IoSlice<'b>] ) -> WriteVectored<'a, 'b, Self>
where Self: Unpin,

Like write, except that it writes from a slice of buffers. Read more

fn write_buf<'a, B>(&'a mut self, src: &'a mut B) -> WriteBuf<'a, Self, B>
where Self: Sized + Unpin, B: Buf,

Writes a buffer into this writer, advancing the buffer’s internal cursor. Read more

fn write_all_buf<'a, B>( &'a mut self, src: &'a mut B ) -> WriteAllBuf<'a, Self, B>
where Self: Sized + Unpin, B: Buf,

Attempts to write an entire buffer into this writer. Read more

fn write_all<'a>(&'a mut self, src: &'a [u8]) -> WriteAll<'a, Self>
where Self: Unpin,

Attempts to write an entire buffer into this writer. Read more

fn write_u8(&mut self, n: u8) -> WriteU8<&mut Self>
where Self: Unpin,

Writes an unsigned 8-bit integer to the underlying writer. Read more

fn write_i8(&mut self, n: i8) -> WriteI8<&mut Self>
where Self: Unpin,

Writes a signed 8-bit integer to the underlying writer. Read more

fn write_u16(&mut self, n: u16) -> WriteU16<&mut Self>
where Self: Unpin,

Writes an unsigned 16-bit integer in big-endian order to the underlying writer. Read more

fn write_i16(&mut self, n: i16) -> WriteI16<&mut Self>
where Self: Unpin,

Writes a signed 16-bit integer in big-endian order to the underlying writer. Read more

fn write_u32(&mut self, n: u32) -> WriteU32<&mut Self>
where Self: Unpin,

Writes an unsigned 32-bit integer in big-endian order to the underlying writer. Read more

fn write_i32(&mut self, n: i32) -> WriteI32<&mut Self>
where Self: Unpin,

Writes a signed 32-bit integer in big-endian order to the underlying writer. Read more

fn write_u64(&mut self, n: u64) -> WriteU64<&mut Self>
where Self: Unpin,

Writes an unsigned 64-bit integer in big-endian order to the underlying writer. Read more

fn write_i64(&mut self, n: i64) -> WriteI64<&mut Self>
where Self: Unpin,

Writes an signed 64-bit integer in big-endian order to the underlying writer. Read more

fn write_u128(&mut self, n: u128) -> WriteU128<&mut Self>
where Self: Unpin,

Writes an unsigned 128-bit integer in big-endian order to the underlying writer. Read more

fn write_i128(&mut self, n: i128) -> WriteI128<&mut Self>
where Self: Unpin,

Writes an signed 128-bit integer in big-endian order to the underlying writer. Read more

fn write_f32(&mut self, n: f32) -> WriteF32<&mut Self>
where Self: Unpin,

Writes an 32-bit floating point type in big-endian order to the underlying writer. Read more

fn write_f64(&mut self, n: f64) -> WriteF64<&mut Self>
where Self: Unpin,

Writes an 64-bit floating point type in big-endian order to the underlying writer. Read more

fn write_u16_le(&mut self, n: u16) -> WriteU16Le<&mut Self>
where Self: Unpin,

Writes an unsigned 16-bit integer in little-endian order to the underlying writer. Read more

fn write_i16_le(&mut self, n: i16) -> WriteI16Le<&mut Self>
where Self: Unpin,

Writes a signed 16-bit integer in little-endian order to the underlying writer. Read more

fn write_u32_le(&mut self, n: u32) -> WriteU32Le<&mut Self>
where Self: Unpin,

Writes an unsigned 32-bit integer in little-endian order to the underlying writer. Read more

fn write_i32_le(&mut self, n: i32) -> WriteI32Le<&mut Self>
where Self: Unpin,

Writes a signed 32-bit integer in little-endian order to the underlying writer. Read more

fn write_u64_le(&mut self, n: u64) -> WriteU64Le<&mut Self>
where Self: Unpin,

Writes an unsigned 64-bit integer in little-endian order to the underlying writer. Read more

fn write_i64_le(&mut self, n: i64) -> WriteI64Le<&mut Self>
where Self: Unpin,

Writes an signed 64-bit integer in little-endian order to the underlying writer. Read more

fn write_u128_le(&mut self, n: u128) -> WriteU128Le<&mut Self>
where Self: Unpin,

Writes an unsigned 128-bit integer in little-endian order to the underlying writer. Read more

fn write_i128_le(&mut self, n: i128) -> WriteI128Le<&mut Self>
where Self: Unpin,

Writes an signed 128-bit integer in little-endian order to the underlying writer. Read more

fn write_f32_le(&mut self, n: f32) -> WriteF32Le<&mut Self>
where Self: Unpin,

Writes an 32-bit floating point type in little-endian order to the underlying writer. Read more

fn write_f64_le(&mut self, n: f64) -> WriteF64Le<&mut Self>
where Self: Unpin,

Writes an 64-bit floating point type in little-endian order to the underlying writer. Read more

fn flush(&mut self) -> Flush<'_, Self>
where Self: Unpin,

Flushes this output stream, ensuring that all intermediately buffered contents reach their destination. Read more

fn shutdown(&mut self) -> Shutdown<'_, Self>
where Self: Unpin,

Shuts down the output stream, ensuring that the value can be dropped cleanly. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, U> TryFrom for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for T
where U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<V, T> VZip<V> for T
where V: MultiLane<T>,