Struct x11rb_protocol::protocol::xproto::GrabButtonRequest

source ·
pub struct GrabButtonRequest {
    pub owner_events: bool,
    pub grab_window: Window,
    pub event_mask: EventMask,
    pub pointer_mode: GrabMode,
    pub keyboard_mode: GrabMode,
    pub confine_to: Window,
    pub cursor: Cursor,
    pub button: ButtonIndex,
    pub modifiers: ModMask,
}
Expand description

Grab pointer button(s).

This request establishes a passive grab. The pointer is actively grabbed as described in GrabPointer, the last-pointer-grab time is set to the time at which the button was pressed (as transmitted in the ButtonPress event), and the ButtonPress event is reported if all of the following conditions are true:

The pointer is not grabbed and the specified button is logically pressed when the specified modifier keys are logically down, and no other buttons or modifier keys are logically down.

The grab-window contains the pointer.

The confine-to window (if any) is viewable.

A passive grab on the same button/key combination does not exist on any ancestor of grab-window.

The interpretation of the remaining arguments is the same as for GrabPointer. The active grab is terminated automatically when the logical state of the pointer has all buttons released, independent of the logical state of modifier keys. Note that the logical state of a device (as seen by means of the protocol) may lag the physical state if device event processing is frozen. This request overrides all previous passive grabs by the same client on the same button/key combinations on the same window. A modifier of AnyModifier is equivalent to issuing the request for all possible modifier combinations (including the combination of no modifiers). It is not required that all specified modifiers have currently assigned keycodes. A button of AnyButton is equivalent to issuing the request for all possible buttons. Otherwise, it is not required that the button specified currently be assigned to a physical button.

An Access error is generated if some other client has already issued a GrabButton request with the same button/key combination on the same window. When using AnyModifier or AnyButton, the request fails completely (no grabs are established), and an Access error is generated if there is a conflicting grab for any combination. The request has no effect on an active grab.

§Fields

  • owner_events - If 1, the grab_window will still get the pointer events. If 0, events are not reported to the grab_window.
  • grab_window - Specifies the window on which the pointer should be grabbed.
  • event_mask - Specifies which pointer events are reported to the client.

TODO: which values?

  • confine_to - Specifies the window to confine the pointer in (the user will not be able to move the pointer out of that window).

The special value XCB_NONE means don’t confine the pointer.

  • cursor - Specifies the cursor that should be displayed or XCB_NONE to not change the cursor.
  • modifiers - The modifiers to grab.

Using the special value XCB_MOD_MASK_ANY means grab the pointer with all possible modifier combinations.

  • pointer_mode -
  • keyboard_mode -
  • button -

§Errors

  • Access - Another client has already issued a GrabButton with the same button/key combination on the same window.
  • Value - TODO: reasons?
  • Cursor - The specified cursor does not exist.
  • Window - The specified window does not exist.

Fields§

§owner_events: bool§grab_window: Window§event_mask: EventMask§pointer_mode: GrabMode§keyboard_mode: GrabMode§confine_to: Window§cursor: Cursor§button: ButtonIndex§modifiers: ModMask

Implementations§

source§

impl GrabButtonRequest

source

pub fn serialize(self) -> BufWithFds<[Cow<'static, [u8]>; 1]>

Serialize this request into bytes for the provided connection

source

pub fn try_parse_request( header: RequestHeader, value: &[u8] ) -> Result<Self, ParseError>

Parse this request given its header, its body, and any fds that go along with it

Trait Implementations§

source§

impl Clone for GrabButtonRequest

source§

fn clone(&self) -> GrabButtonRequest

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for GrabButtonRequest

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for GrabButtonRequest

source§

fn default() -> GrabButtonRequest

Returns the “default value” for a type. Read more
source§

impl<'de> Deserialize<'de> for GrabButtonRequest

source§

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
source§

impl Hash for GrabButtonRequest

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for GrabButtonRequest

source§

fn cmp(&self, other: &GrabButtonRequest) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
source§

impl PartialEq for GrabButtonRequest

source§

fn eq(&self, other: &GrabButtonRequest) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd for GrabButtonRequest

source§

fn partial_cmp(&self, other: &GrabButtonRequest) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl Request for GrabButtonRequest

source§

const EXTENSION_NAME: Option<&'static str> = None

The protocol name of the extension that this request belongs to, or None for core requests
source§

fn serialize(self, _major_opcode: u8) -> BufWithFds<Vec<u8>>

Serialize this request into its X11 protocol wire representation. Read more
source§

impl Serialize for GrabButtonRequest

source§

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more
source§

impl Copy for GrabButtonRequest

source§

impl Eq for GrabButtonRequest

source§

impl StructuralPartialEq for GrabButtonRequest

source§

impl VoidRequest for GrabButtonRequest

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,