Struct x11rb_protocol::protocol::xproto::GrabKeyRequest

source ·
pub struct GrabKeyRequest {
    pub owner_events: bool,
    pub grab_window: Window,
    pub modifiers: ModMask,
    pub key: Keycode,
    pub pointer_mode: GrabMode,
    pub keyboard_mode: GrabMode,
}
Expand description

Grab keyboard key(s).

Establishes a passive grab on the keyboard. In the future, the keyboard is actively grabbed (as for GrabKeyboard), the last-keyboard-grab time is set to the time at which the key was pressed (as transmitted in the KeyPress event), and the KeyPress event is reported if all of the following conditions are true:

The keyboard is not grabbed and the specified key (which can itself be a modifier key) is logically pressed when the specified modifier keys are logically down, and no other modifier keys are logically down.

Either the grab_window is an ancestor of (or is) the focus window, or the grab_window is a descendant of the focus window and contains the pointer.

A passive grab on the same key combination does not exist on any ancestor of grab_window.

The interpretation of the remaining arguments is as for XGrabKeyboard. The active grab is terminated automatically when the logical state of the keyboard has the specified key released (independent of the logical state of the modifier keys), at which point a KeyRelease event is reported to the grabbing window.

Note that the logical state of a device (as seen by client applications) may lag the physical state if device event processing is frozen.

A modifiers argument of AnyModifier is equivalent to issuing the request for all possible modifier combinations (including the combination of no modifiers). It is not required that all modifiers specified have currently assigned KeyCodes. A keycode argument of AnyKey is equivalent to issuing the request for all possible KeyCodes. Otherwise, the specified keycode must be in the range specified by min_keycode and max_keycode in the connection setup, or a BadValue error results.

If some other client has issued a XGrabKey with the same key combination on the same window, a BadAccess error results. When using AnyModifier or AnyKey, the request fails completely, and a BadAccess error results (no grabs are established) if there is a conflicting grab for any combination.

§Fields

  • owner_events - If 1, the grab_window will still get the key events. If 0, events are not reported to the grab_window.
  • grab_window - Specifies the window on which the key should be grabbed.
  • key - The keycode of the key to grab.

The special value XCB_GRAB_ANY means grab any key.

  • modifiers - The modifiers to grab.

Using the special value XCB_MOD_MASK_ANY means grab the key with all possible modifier combinations.

  • pointer_mode -
  • keyboard_mode -

§Errors

  • Access - Another client has already issued a GrabKey with the same button/key combination on the same window.
  • Value - The key is not XCB_GRAB_ANY and not in the range specified by min_keycode and max_keycode in the connection setup.
  • Window - The specified window does not exist.

§See

  • GrabKeyboard: request

Fields§

§owner_events: bool§grab_window: Window§modifiers: ModMask§key: Keycode§pointer_mode: GrabMode§keyboard_mode: GrabMode

Implementations§

source§

impl GrabKeyRequest

source

pub fn serialize(self) -> BufWithFds<[Cow<'static, [u8]>; 1]>

Serialize this request into bytes for the provided connection

source

pub fn try_parse_request( header: RequestHeader, value: &[u8] ) -> Result<Self, ParseError>

Parse this request given its header, its body, and any fds that go along with it

Trait Implementations§

source§

impl Clone for GrabKeyRequest

source§

fn clone(&self) -> GrabKeyRequest

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for GrabKeyRequest

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for GrabKeyRequest

source§

fn default() -> GrabKeyRequest

Returns the “default value” for a type. Read more
source§

impl<'de> Deserialize<'de> for GrabKeyRequest

source§

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
source§

impl Hash for GrabKeyRequest

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for GrabKeyRequest

source§

fn cmp(&self, other: &GrabKeyRequest) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
source§

impl PartialEq for GrabKeyRequest

source§

fn eq(&self, other: &GrabKeyRequest) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd for GrabKeyRequest

source§

fn partial_cmp(&self, other: &GrabKeyRequest) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl Request for GrabKeyRequest

source§

const EXTENSION_NAME: Option<&'static str> = None

The protocol name of the extension that this request belongs to, or None for core requests
source§

fn serialize(self, _major_opcode: u8) -> BufWithFds<Vec<u8>>

Serialize this request into its X11 protocol wire representation. Read more
source§

impl Serialize for GrabKeyRequest

source§

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more
source§

impl Copy for GrabKeyRequest

source§

impl Eq for GrabKeyRequest

source§

impl StructuralPartialEq for GrabKeyRequest

source§

impl VoidRequest for GrabKeyRequest

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,