Struct x11rb_protocol::protocol::xkb::ListComponentsReply

source ·
pub struct ListComponentsReply {
    pub device_id: u8,
    pub sequence: u16,
    pub length: u32,
    pub extra: u16,
    pub keymaps: Vec<Listing>,
    pub keycodes: Vec<Listing>,
    pub types: Vec<Listing>,
    pub compat_maps: Vec<Listing>,
    pub symbols: Vec<Listing>,
    pub geometries: Vec<Listing>,
}

Fields§

§device_id: u8§sequence: u16§length: u32§extra: u16§keymaps: Vec<Listing>§keycodes: Vec<Listing>§types: Vec<Listing>§compat_maps: Vec<Listing>§symbols: Vec<Listing>§geometries: Vec<Listing>

Implementations§

source§

impl ListComponentsReply

source

pub fn n_keymaps(&self) -> u16

Get the value of the nKeymaps field.

The nKeymaps field is used as the length field of the keymaps field. This function computes the field’s value again based on the length of the list.

§Panics

Panics if the value cannot be represented in the target type. This cannot happen with values of the struct received from the X11 server.

source

pub fn n_keycodes(&self) -> u16

Get the value of the nKeycodes field.

The nKeycodes field is used as the length field of the keycodes field. This function computes the field’s value again based on the length of the list.

§Panics

Panics if the value cannot be represented in the target type. This cannot happen with values of the struct received from the X11 server.

source

pub fn n_types(&self) -> u16

Get the value of the nTypes field.

The nTypes field is used as the length field of the types field. This function computes the field’s value again based on the length of the list.

§Panics

Panics if the value cannot be represented in the target type. This cannot happen with values of the struct received from the X11 server.

source

pub fn n_compat_maps(&self) -> u16

Get the value of the nCompatMaps field.

The nCompatMaps field is used as the length field of the compatMaps field. This function computes the field’s value again based on the length of the list.

§Panics

Panics if the value cannot be represented in the target type. This cannot happen with values of the struct received from the X11 server.

source

pub fn n_symbols(&self) -> u16

Get the value of the nSymbols field.

The nSymbols field is used as the length field of the symbols field. This function computes the field’s value again based on the length of the list.

§Panics

Panics if the value cannot be represented in the target type. This cannot happen with values of the struct received from the X11 server.

source

pub fn n_geometries(&self) -> u16

Get the value of the nGeometries field.

The nGeometries field is used as the length field of the geometries field. This function computes the field’s value again based on the length of the list.

§Panics

Panics if the value cannot be represented in the target type. This cannot happen with values of the struct received from the X11 server.

Trait Implementations§

source§

impl Clone for ListComponentsReply

source§

fn clone(&self) -> ListComponentsReply

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for ListComponentsReply

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for ListComponentsReply

source§

fn default() -> ListComponentsReply

Returns the “default value” for a type. Read more
source§

impl<'de> Deserialize<'de> for ListComponentsReply

source§

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
source§

impl From<ListComponentsReply> for Reply

source§

fn from(reply: ListComponentsReply) -> Reply

Converts to this type from the input type.
source§

impl Hash for ListComponentsReply

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for ListComponentsReply

source§

fn cmp(&self, other: &ListComponentsReply) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
source§

impl PartialEq for ListComponentsReply

source§

fn eq(&self, other: &ListComponentsReply) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd for ListComponentsReply

source§

fn partial_cmp(&self, other: &ListComponentsReply) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl Serialize for ListComponentsReply

source§

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more
source§

impl Serialize for ListComponentsReply

§

type Bytes = Vec<u8>

The value returned by serialize. Read more
source§

fn serialize(&self) -> Vec<u8>

Serialize this value into X11 raw bytes.
source§

fn serialize_into(&self, bytes: &mut Vec<u8>)

Serialize this value into X11 raw bytes, appending the result into bytes. Read more
source§

impl TryParse for ListComponentsReply

source§

fn try_parse(initial_value: &[u8]) -> Result<(Self, &[u8]), ParseError>

Try to parse the given values into an instance of this type. Read more
source§

impl Eq for ListComponentsReply

source§

impl StructuralPartialEq for ListComponentsReply

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> TryParseFd for T
where T: TryParse,

source§

fn try_parse_fd<'a>( value: &'a [u8], _: &mut Vec<RawFdContainer> ) -> Result<(T, &'a [u8]), ParseError>

Try to parse the given values into an instance of this type. Read more
source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,