pub struct CreateLogGroupFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to CreateLogGroup.
Creates a log group with the specified name. You can create up to 1,000,000 log groups per Region per account.
You must use the following guidelines when naming a log group:
-
Log group names must be unique within a Region for an Amazon Web Services account.
-
Log group names can be between 1 and 512 characters long.
-
Log group names consist of the following characters: a-z, A-Z, 0-9, '_' (underscore), '-' (hyphen), '/' (forward slash), '.' (period), and '#' (number sign)
-
Log group names can't start with the string
aws/
When you create a log group, by default the log events in the log group do not expire. To set a retention policy so that events expire and are deleted after a specified time, use PutRetentionPolicy.
If you associate an KMS key with the log group, ingested data is encrypted using the KMS key. This association is stored as long as the data encrypted with the KMS key is still within CloudWatch Logs. This enables CloudWatch Logs to decrypt this data whenever it is requested.
If you attempt to associate a KMS key with the log group but the KMS key does not exist or the KMS key is disabled, you receive an InvalidParameterException error.
CloudWatch Logs supports only symmetric KMS keys. Do not associate an asymmetric KMS key with your log group. For more information, see Using Symmetric and Asymmetric Keys.
Implementations§
Source§impl CreateLogGroupFluentBuilder
impl CreateLogGroupFluentBuilder
Sourcepub fn as_input(&self) -> &CreateLogGroupInputBuilder
pub fn as_input(&self) -> &CreateLogGroupInputBuilder
Access the CreateLogGroup as a reference.
Sourcepub async fn send(
self,
) -> Result<CreateLogGroupOutput, SdkError<CreateLogGroupError, HttpResponse>>
pub async fn send( self, ) -> Result<CreateLogGroupOutput, SdkError<CreateLogGroupError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<CreateLogGroupOutput, CreateLogGroupError, Self>
pub fn customize( self, ) -> CustomizableOperation<CreateLogGroupOutput, CreateLogGroupError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn log_group_name(self, input: impl Into<String>) -> Self
pub fn log_group_name(self, input: impl Into<String>) -> Self
A name for the log group.
Sourcepub fn set_log_group_name(self, input: Option<String>) -> Self
pub fn set_log_group_name(self, input: Option<String>) -> Self
A name for the log group.
Sourcepub fn get_log_group_name(&self) -> &Option<String>
pub fn get_log_group_name(&self) -> &Option<String>
A name for the log group.
Sourcepub fn kms_key_id(self, input: impl Into<String>) -> Self
pub fn kms_key_id(self, input: impl Into<String>) -> Self
The Amazon Resource Name (ARN) of the KMS key to use when encrypting log data. For more information, see Amazon Resource Names.
Sourcepub fn set_kms_key_id(self, input: Option<String>) -> Self
pub fn set_kms_key_id(self, input: Option<String>) -> Self
The Amazon Resource Name (ARN) of the KMS key to use when encrypting log data. For more information, see Amazon Resource Names.
Sourcepub fn get_kms_key_id(&self) -> &Option<String>
pub fn get_kms_key_id(&self) -> &Option<String>
The Amazon Resource Name (ARN) of the KMS key to use when encrypting log data. For more information, see Amazon Resource Names.
Adds a key-value pair to tags.
To override the contents of this collection use set_tags.
The key-value pairs to use for the tags.
You can grant users access to certain log groups while preventing them from accessing other log groups. To do so, tag your groups and use IAM policies that refer to those tags. To assign tags when you create a log group, you must have either the logs:TagResource or logs:TagLogGroup permission. For more information about tagging, see Tagging Amazon Web Services resources. For more information about using tags to control access, see Controlling access to Amazon Web Services resources using tags.
The key-value pairs to use for the tags.
You can grant users access to certain log groups while preventing them from accessing other log groups. To do so, tag your groups and use IAM policies that refer to those tags. To assign tags when you create a log group, you must have either the logs:TagResource or logs:TagLogGroup permission. For more information about tagging, see Tagging Amazon Web Services resources. For more information about using tags to control access, see Controlling access to Amazon Web Services resources using tags.
The key-value pairs to use for the tags.
You can grant users access to certain log groups while preventing them from accessing other log groups. To do so, tag your groups and use IAM policies that refer to those tags. To assign tags when you create a log group, you must have either the logs:TagResource or logs:TagLogGroup permission. For more information about tagging, see Tagging Amazon Web Services resources. For more information about using tags to control access, see Controlling access to Amazon Web Services resources using tags.
Sourcepub fn log_group_class(self, input: LogGroupClass) -> Self
pub fn log_group_class(self, input: LogGroupClass) -> Self
Use this parameter to specify the log group class for this log group. There are two classes:
-
The
Standardlog class supports all CloudWatch Logs features. -
The
Infrequent Accesslog class supports a subset of CloudWatch Logs features and incurs lower costs.
If you omit this parameter, the default of STANDARD is used.
The value of logGroupClass can't be changed after a log group is created.
For details about the features supported by each class, see Log classes
Sourcepub fn set_log_group_class(self, input: Option<LogGroupClass>) -> Self
pub fn set_log_group_class(self, input: Option<LogGroupClass>) -> Self
Use this parameter to specify the log group class for this log group. There are two classes:
-
The
Standardlog class supports all CloudWatch Logs features. -
The
Infrequent Accesslog class supports a subset of CloudWatch Logs features and incurs lower costs.
If you omit this parameter, the default of STANDARD is used.
The value of logGroupClass can't be changed after a log group is created.
For details about the features supported by each class, see Log classes
Sourcepub fn get_log_group_class(&self) -> &Option<LogGroupClass>
pub fn get_log_group_class(&self) -> &Option<LogGroupClass>
Use this parameter to specify the log group class for this log group. There are two classes:
-
The
Standardlog class supports all CloudWatch Logs features. -
The
Infrequent Accesslog class supports a subset of CloudWatch Logs features and incurs lower costs.
If you omit this parameter, the default of STANDARD is used.
The value of logGroupClass can't be changed after a log group is created.
For details about the features supported by each class, see Log classes
Trait Implementations§
Source§impl Clone for CreateLogGroupFluentBuilder
impl Clone for CreateLogGroupFluentBuilder
Source§fn clone(&self) -> CreateLogGroupFluentBuilder
fn clone(&self) -> CreateLogGroupFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for CreateLogGroupFluentBuilder
impl !RefUnwindSafe for CreateLogGroupFluentBuilder
impl Send for CreateLogGroupFluentBuilder
impl Sync for CreateLogGroupFluentBuilder
impl Unpin for CreateLogGroupFluentBuilder
impl !UnwindSafe for CreateLogGroupFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);