pub struct PutDeliveryDestinationFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to PutDeliveryDestination.
Creates or updates a logical delivery destination. A delivery destination is an Amazon Web Services resource that represents an Amazon Web Services service that logs can be sent to. CloudWatch Logs, Amazon S3, and Firehose are supported as logs delivery destinations.
To configure logs delivery between a supported Amazon Web Services service and a destination, you must do the following:
-
Create a delivery source, which is a logical object that represents the resource that is actually sending the logs. For more information, see PutDeliverySource.
-
Use
PutDeliveryDestinationto create a delivery destination, which is a logical object that represents the actual delivery destination. -
If you are delivering logs cross-account, you must use PutDeliveryDestinationPolicy in the destination account to assign an IAM policy to the destination. This policy allows delivery to that destination.
-
Use
CreateDeliveryto create a delivery by pairing exactly one delivery source and one delivery destination. For more information, see CreateDelivery.
You can configure a single delivery source to send logs to multiple destinations by creating multiple deliveries. You can also create multiple deliveries to configure multiple delivery sources to send logs to the same delivery destination.
Only some Amazon Web Services services support being configured as a delivery source. These services are listed as Supported \[V2 Permissions\] in the table at Enabling logging from Amazon Web Services services.
If you use this operation to update an existing delivery destination, all the current delivery destination parameters are overwritten with the new parameter values that you specify.
Implementations§
Source§impl PutDeliveryDestinationFluentBuilder
impl PutDeliveryDestinationFluentBuilder
Sourcepub fn as_input(&self) -> &PutDeliveryDestinationInputBuilder
pub fn as_input(&self) -> &PutDeliveryDestinationInputBuilder
Access the PutDeliveryDestination as a reference.
Sourcepub async fn send(
self,
) -> Result<PutDeliveryDestinationOutput, SdkError<PutDeliveryDestinationError, HttpResponse>>
pub async fn send( self, ) -> Result<PutDeliveryDestinationOutput, SdkError<PutDeliveryDestinationError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<PutDeliveryDestinationOutput, PutDeliveryDestinationError, Self>
pub fn customize( self, ) -> CustomizableOperation<PutDeliveryDestinationOutput, PutDeliveryDestinationError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn name(self, input: impl Into<String>) -> Self
pub fn name(self, input: impl Into<String>) -> Self
A name for this delivery destination. This name must be unique for all delivery destinations in your account.
Sourcepub fn set_name(self, input: Option<String>) -> Self
pub fn set_name(self, input: Option<String>) -> Self
A name for this delivery destination. This name must be unique for all delivery destinations in your account.
Sourcepub fn get_name(&self) -> &Option<String>
pub fn get_name(&self) -> &Option<String>
A name for this delivery destination. This name must be unique for all delivery destinations in your account.
Sourcepub fn output_format(self, input: OutputFormat) -> Self
pub fn output_format(self, input: OutputFormat) -> Self
The format for the logs that this delivery destination will receive.
Sourcepub fn set_output_format(self, input: Option<OutputFormat>) -> Self
pub fn set_output_format(self, input: Option<OutputFormat>) -> Self
The format for the logs that this delivery destination will receive.
Sourcepub fn get_output_format(&self) -> &Option<OutputFormat>
pub fn get_output_format(&self) -> &Option<OutputFormat>
The format for the logs that this delivery destination will receive.
Sourcepub fn delivery_destination_configuration(
self,
input: DeliveryDestinationConfiguration,
) -> Self
pub fn delivery_destination_configuration( self, input: DeliveryDestinationConfiguration, ) -> Self
A structure that contains the ARN of the Amazon Web Services resource that will receive the logs.
Sourcepub fn set_delivery_destination_configuration(
self,
input: Option<DeliveryDestinationConfiguration>,
) -> Self
pub fn set_delivery_destination_configuration( self, input: Option<DeliveryDestinationConfiguration>, ) -> Self
A structure that contains the ARN of the Amazon Web Services resource that will receive the logs.
Sourcepub fn get_delivery_destination_configuration(
&self,
) -> &Option<DeliveryDestinationConfiguration>
pub fn get_delivery_destination_configuration( &self, ) -> &Option<DeliveryDestinationConfiguration>
A structure that contains the ARN of the Amazon Web Services resource that will receive the logs.
Adds a key-value pair to tags.
To override the contents of this collection use set_tags.
An optional list of key-value pairs to associate with the resource.
For more information about tagging, see Tagging Amazon Web Services resources
An optional list of key-value pairs to associate with the resource.
For more information about tagging, see Tagging Amazon Web Services resources
An optional list of key-value pairs to associate with the resource.
For more information about tagging, see Tagging Amazon Web Services resources
Trait Implementations§
Source§impl Clone for PutDeliveryDestinationFluentBuilder
impl Clone for PutDeliveryDestinationFluentBuilder
Source§fn clone(&self) -> PutDeliveryDestinationFluentBuilder
fn clone(&self) -> PutDeliveryDestinationFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for PutDeliveryDestinationFluentBuilder
impl !RefUnwindSafe for PutDeliveryDestinationFluentBuilder
impl Send for PutDeliveryDestinationFluentBuilder
impl Sync for PutDeliveryDestinationFluentBuilder
impl Unpin for PutDeliveryDestinationFluentBuilder
impl !UnwindSafe for PutDeliveryDestinationFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);