pub struct PutDeliveryDestinationPolicyFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to PutDeliveryDestinationPolicy.
Creates and assigns an IAM policy that grants permissions to CloudWatch Logs to deliver logs cross-account to a specified destination in this account. To configure the delivery of logs from an Amazon Web Services service in another account to a logs delivery destination in the current account, you must do the following:
-
Create a delivery source, which is a logical object that represents the resource that is actually sending the logs. For more information, see PutDeliverySource.
-
Create a delivery destination, which is a logical object that represents the actual delivery destination. For more information, see PutDeliveryDestination.
-
Use this operation in the destination account to assign an IAM policy to the destination. This policy allows delivery to that destination.
-
Create a delivery by pairing exactly one delivery source and one delivery destination. For more information, see CreateDelivery.
Only some Amazon Web Services services support being configured as a delivery source. These services are listed as Supported \[V2 Permissions\] in the table at Enabling logging from Amazon Web Services services.
The contents of the policy must include two statements. One statement enables general logs delivery, and the other allows delivery to the chosen destination. See the examples for the needed policies.
Implementations§
Source§impl PutDeliveryDestinationPolicyFluentBuilder
impl PutDeliveryDestinationPolicyFluentBuilder
Sourcepub fn as_input(&self) -> &PutDeliveryDestinationPolicyInputBuilder
pub fn as_input(&self) -> &PutDeliveryDestinationPolicyInputBuilder
Access the PutDeliveryDestinationPolicy as a reference.
Sourcepub async fn send(
self,
) -> Result<PutDeliveryDestinationPolicyOutput, SdkError<PutDeliveryDestinationPolicyError, HttpResponse>>
pub async fn send( self, ) -> Result<PutDeliveryDestinationPolicyOutput, SdkError<PutDeliveryDestinationPolicyError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<PutDeliveryDestinationPolicyOutput, PutDeliveryDestinationPolicyError, Self>
pub fn customize( self, ) -> CustomizableOperation<PutDeliveryDestinationPolicyOutput, PutDeliveryDestinationPolicyError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn delivery_destination_name(self, input: impl Into<String>) -> Self
pub fn delivery_destination_name(self, input: impl Into<String>) -> Self
The name of the delivery destination to assign this policy to.
Sourcepub fn set_delivery_destination_name(self, input: Option<String>) -> Self
pub fn set_delivery_destination_name(self, input: Option<String>) -> Self
The name of the delivery destination to assign this policy to.
Sourcepub fn get_delivery_destination_name(&self) -> &Option<String>
pub fn get_delivery_destination_name(&self) -> &Option<String>
The name of the delivery destination to assign this policy to.
Sourcepub fn delivery_destination_policy(self, input: impl Into<String>) -> Self
pub fn delivery_destination_policy(self, input: impl Into<String>) -> Self
The contents of the policy.
Sourcepub fn set_delivery_destination_policy(self, input: Option<String>) -> Self
pub fn set_delivery_destination_policy(self, input: Option<String>) -> Self
The contents of the policy.
Sourcepub fn get_delivery_destination_policy(&self) -> &Option<String>
pub fn get_delivery_destination_policy(&self) -> &Option<String>
The contents of the policy.
Trait Implementations§
Source§impl Clone for PutDeliveryDestinationPolicyFluentBuilder
impl Clone for PutDeliveryDestinationPolicyFluentBuilder
Source§fn clone(&self) -> PutDeliveryDestinationPolicyFluentBuilder
fn clone(&self) -> PutDeliveryDestinationPolicyFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for PutDeliveryDestinationPolicyFluentBuilder
impl !RefUnwindSafe for PutDeliveryDestinationPolicyFluentBuilder
impl Send for PutDeliveryDestinationPolicyFluentBuilder
impl Sync for PutDeliveryDestinationPolicyFluentBuilder
impl Unpin for PutDeliveryDestinationPolicyFluentBuilder
impl !UnwindSafe for PutDeliveryDestinationPolicyFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);