Struct hassle_rs::intellisense::DxcTypeKind

source · [−]

pub struct DxcTypeKind { /* private fields */ }

Implementations

source

pub const fn empty() -> DxcTypeKind

Returns an empty set of flags

source

pub const fn all() -> DxcTypeKind

Returns the set containing all flags.

source

pub const fn bits(&self) -> u32

Returns the raw value of the flags currently stored.

source

pub fn from_bits(bits: u32) -> Option<DxcTypeKind>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

source

pub const fn from_bits_truncate(bits: u32) -> DxcTypeKind

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

source

pub const unsafe fn from_bits_unchecked(bits: u32) -> DxcTypeKind

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

source

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

source

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

source

pub const fn intersects(&self, other: DxcTypeKind) -> bool

Returns true if there are flags common to both self and other.

source

pub const fn contains(&self, other: DxcTypeKind) -> bool

Returns true all of the flags in other are contained within self.

source

pub fn insert(&mut self, other: DxcTypeKind)

Inserts the specified flags in-place.

source

pub fn remove(&mut self, other: DxcTypeKind)

Removes the specified flags in-place.

source

pub fn toggle(&mut self, other: DxcTypeKind)

Toggles the specified flags in-place.

source

pub fn set(&mut self, other: DxcTypeKind, value: bool)

Inserts or removes the specified flags depending on the passed value.

Trait Implementations

source

impl Binary for DxcTypeKind

source

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

source

impl BitAnd<DxcTypeKind> for DxcTypeKind

source

fn bitand(self, other: DxcTypeKind) -> DxcTypeKind

Returns the intersection between the two sets of flags.

type Output = DxcTypeKind

The resulting type after applying the & operator.

source

impl BitAndAssign<DxcTypeKind> for DxcTypeKind

source

fn bitand_assign(&mut self, other: DxcTypeKind)

Disables all flags disabled in the set.

source

impl BitOr<DxcTypeKind> for DxcTypeKind

source

fn bitor(self, other: DxcTypeKind) -> DxcTypeKind

Returns the union of the two sets of flags.

type Output = DxcTypeKind

The resulting type after applying the | operator.

source

impl BitOrAssign<DxcTypeKind> for DxcTypeKind

source

fn bitor_assign(&mut self, other: DxcTypeKind)

Adds the set of flags.

source

impl BitXor<DxcTypeKind> for DxcTypeKind

source

fn bitxor(self, other: DxcTypeKind) -> DxcTypeKind

Returns the left flags, but with all the right flags toggled.

type Output = DxcTypeKind

The resulting type after applying the ^ operator.

source

impl BitXorAssign<DxcTypeKind> for DxcTypeKind

source

fn bitxor_assign(&mut self, other: DxcTypeKind)

Toggles the set of flags.

source

impl Clone for DxcTypeKind

source

fn clone(&self) -> DxcTypeKind

Returns a copy of the value. Read more

1.0.0 · source

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

source

impl Debug for DxcTypeKind

source

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

source

impl Extend<DxcTypeKind> for DxcTypeKind

source

fn extend<T: IntoIterator<Item = DxcTypeKind>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator. Read more

source

fn extend_one(&mut self, item: A)

🔬 This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

source

fn extend_reserve(&mut self, additional: usize)

🔬 This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements. Read more

source

impl FromIterator<DxcTypeKind> for DxcTypeKind

source

fn from_iter<T: IntoIterator<Item = DxcTypeKind>>(iterator: T) -> DxcTypeKind

Creates a value from an iterator. Read more

source

impl Hash for DxcTypeKind

source

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given Hasher. Read more

1.3.0 · source

fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,

Feeds a slice of this type into the given Hasher. Read more

source

impl LowerHex for DxcTypeKind

source

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

source

impl Not for DxcTypeKind

source

fn not(self) -> DxcTypeKind

Returns the complement of this set of flags.

type Output = DxcTypeKind

The resulting type after applying the ! operator.

source

impl Octal for DxcTypeKind

source

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

source

impl Ord for DxcTypeKind

source

fn cmp(&self, other: &DxcTypeKind) -> Ordering

This method returns an Ordering between self and other. Read more

1.21.0 · source

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values. Read more

1.21.0 · source

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values. Read more

1.50.0 · source

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval. Read more

source

impl PartialEq<DxcTypeKind> for DxcTypeKind

source

fn eq(&self, other: &DxcTypeKind) -> bool

This method tests for self and other values to be equal, and is used by ==. Read more

source

fn ne(&self, other: &DxcTypeKind) -> bool

This method tests for !=.

source

impl PartialOrd<DxcTypeKind> for DxcTypeKind

source

fn partial_cmp(&self, other: &DxcTypeKind) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more

1.0.0 · source

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0 · source

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0 · source

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0 · source

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

source

impl Sub<DxcTypeKind> for DxcTypeKind

source

fn sub(self, other: DxcTypeKind) -> DxcTypeKind

Returns the set difference of the two sets of flags.

type Output = DxcTypeKind

The resulting type after applying the - operator.

source

impl SubAssign<DxcTypeKind> for DxcTypeKind

source

fn sub_assign(&mut self, other: DxcTypeKind)

Disables all flags enabled in the set.

source

impl UpperHex for DxcTypeKind

source

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

source

impl Copy for DxcTypeKind

source

impl Eq for DxcTypeKind

source

impl StructuralEq for DxcTypeKind

source

impl StructuralPartialEq for DxcTypeKind

Auto Trait Implementations

impl RefUnwindSafe for DxcTypeKind

impl Send for DxcTypeKind

impl Sync for DxcTypeKind

impl Unpin for DxcTypeKind

impl UnwindSafe for DxcTypeKind

Blanket Implementations

source

impl<T> Any for T where
T: 'static + ?Sized,

source

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

source

impl<T> Borrow<T> for T where
T: ?Sized,

const: unstable · source

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

source

impl<T> BorrowMut<T> for T where
T: ?Sized,

const: unstable · source

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

source

impl<T> From<T> for T

const: unstable · source

fn from(t: T) -> T

Returns the argument unchanged.

source

impl<T, U> Into for T where
U: From<T>,

const: unstable · source

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source

impl<T> ToOwned for T where
T: Clone,

type Owned = T

The resulting type after obtaining ownership.

source

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

source

fn clone_into(&self, target: &mut T)

🔬 This is a nightly-only experimental API. (toowned_clone_into)

Uses borrowed data to replace owned data, usually by cloning. Read more

source

impl<T, U> TryFrom for T where
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

source

impl<T, U> TryInto for T where
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

Struct hassle_rs::intellisense::DxcTypeKind

Implementations

impl DxcTypeKind

pub const Invalid: DxcTypeKind

pub const Unexposed: DxcTypeKind

pub const Void: DxcTypeKind

pub const Bool: DxcTypeKind

pub const Char_U: DxcTypeKind

pub const UChar: DxcTypeKind

pub const Char16: DxcTypeKind

pub const Char32: DxcTypeKind

pub const UShort: DxcTypeKind

pub const UInt: DxcTypeKind

pub const ULong: DxcTypeKind

pub const ULongLong: DxcTypeKind

pub const UInt128: DxcTypeKind

pub const Char_S: DxcTypeKind

pub const SChar: DxcTypeKind

pub const WChar: DxcTypeKind

pub const Short: DxcTypeKind

pub const Int: DxcTypeKind

pub const Long: DxcTypeKind

pub const LongLong: DxcTypeKind

pub const Int128: DxcTypeKind

pub const Float: DxcTypeKind

pub const Double: DxcTypeKind

pub const LongDouble: DxcTypeKind

pub const NullPtr: DxcTypeKind

pub const Overload: DxcTypeKind

pub const Dependent: DxcTypeKind

pub const ObjCId: DxcTypeKind

pub const ObjCClass: DxcTypeKind

pub const ObjCSel: DxcTypeKind

pub const FirstBuiltin: DxcTypeKind

pub const LastBuiltin: DxcTypeKind

pub const Complex: DxcTypeKind

pub const Pointer: DxcTypeKind

pub const BlockPointer: DxcTypeKind

pub const LValueReference: DxcTypeKind

pub const RValueReference: DxcTypeKind

pub const Record: DxcTypeKind

pub const Enum: DxcTypeKind

pub const Typedef: DxcTypeKind

pub const ObjCInterface: DxcTypeKind

pub const ObjCObjectPointer: DxcTypeKind

pub const FunctionNoProto: DxcTypeKind

pub const FunctionProto: DxcTypeKind

pub const ConstantArray: DxcTypeKind

pub const Vector: DxcTypeKind

pub const IncompleteArray: DxcTypeKind

pub const VariableArray: DxcTypeKind

pub const DependentSizedArray: DxcTypeKind

pub const MemberPointer: DxcTypeKind

pub const fn empty() -> DxcTypeKind

pub const fn all() -> DxcTypeKind

pub const fn bits(&self) -> u32

pub fn from_bits(bits: u32) -> Option<DxcTypeKind>

pub const fn from_bits_truncate(bits: u32) -> DxcTypeKind

pub const unsafe fn from_bits_unchecked(bits: u32) -> DxcTypeKind

pub const fn is_empty(&self) -> bool

pub const fn is_all(&self) -> bool

pub const fn intersects(&self, other: DxcTypeKind) -> bool

pub const fn contains(&self, other: DxcTypeKind) -> bool

pub fn insert(&mut self, other: DxcTypeKind)

pub fn remove(&mut self, other: DxcTypeKind)

pub fn toggle(&mut self, other: DxcTypeKind)

pub fn set(&mut self, other: DxcTypeKind, value: bool)

Trait Implementations

impl Binary for DxcTypeKind

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl BitAnd<DxcTypeKind> for DxcTypeKind

fn bitand(self, other: DxcTypeKind) -> DxcTypeKind

type Output = DxcTypeKind

impl BitAndAssign<DxcTypeKind> for DxcTypeKind

fn bitand_assign(&mut self, other: DxcTypeKind)

impl BitOr<DxcTypeKind> for DxcTypeKind

fn bitor(self, other: DxcTypeKind) -> DxcTypeKind

type Output = DxcTypeKind

impl BitOrAssign<DxcTypeKind> for DxcTypeKind

fn bitor_assign(&mut self, other: DxcTypeKind)

fn hash<H: Hasher>(&self, state: &mut H)

fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,

impl<T> Any for T where
T: 'static + ?Sized,

impl<T> Borrow<T> for T where
T: ?Sized,