pub struct DsuStatusA(pub u8);Expand description
Device Service Unit Status A Register, DSU - STATUSA
Tuple Fields§
§0: u8Implementations§
Source§impl DsuStatusA
impl DsuStatusA
Sourcepub fn perr(&self) -> bool
pub fn perr(&self) -> bool
Protection Error
This bit is set when a command that is not allowed in Protected state is issued.
Writing a ‘0’ to this bit has no effect.
Writing a ‘1’ to this bit clears the Protection Error bit.
Sourcepub fn fail(&self) -> bool
pub fn fail(&self) -> bool
Failure
This bit is set when a DSU operation failure is detected.
Writing a ‘0’ to this bit has no effect.
Writing a ‘1’ to this bit clears the Failure bit.
Sourcepub fn berr(&self) -> bool
pub fn berr(&self) -> bool
Bus Error
This bit is set when a bus error is detected.
Writing a ‘0’ to this bit has no effect.
Writing a ‘1’ to this bit clears the Bus Error bit.
Sourcepub fn crstext(&self) -> bool
pub fn crstext(&self) -> bool
CPU Reset Phase Extension
This bit is set when a debug adapter Cold-Plugging is detected, which extends the CPU Reset phase.
Writing a ‘0’ to this bit has no effect.
Writing a ‘1’ to this bit clears the CPU Reset Phase Extension bit.
Sourcepub fn done(&self) -> bool
pub fn done(&self) -> bool
Done
This bit is set when a DSU operation is completed.
Writing a ‘0’ to this bit has no effect.
Writing a ‘1’ to this bit clears the Done bit.
Sourcepub fn set_perr(&mut self, value: bool)
pub fn set_perr(&mut self, value: bool)
Protection Error
This bit is set when a command that is not allowed in Protected state is issued.
Writing a ‘0’ to this bit has no effect.
Writing a ‘1’ to this bit clears the Protection Error bit.
Sourcepub fn set_fail(&mut self, value: bool)
pub fn set_fail(&mut self, value: bool)
Failure
This bit is set when a DSU operation failure is detected.
Writing a ‘0’ to this bit has no effect.
Writing a ‘1’ to this bit clears the Failure bit.
Sourcepub fn set_berr(&mut self, value: bool)
pub fn set_berr(&mut self, value: bool)
Bus Error
This bit is set when a bus error is detected.
Writing a ‘0’ to this bit has no effect.
Writing a ‘1’ to this bit clears the Bus Error bit.
Sourcepub fn set_crstext(&mut self, value: bool)
pub fn set_crstext(&mut self, value: bool)
CPU Reset Phase Extension
This bit is set when a debug adapter Cold-Plugging is detected, which extends the CPU Reset phase.
Writing a ‘0’ to this bit has no effect.
Writing a ‘1’ to this bit clears the CPU Reset Phase Extension bit.
Trait Implementations§
Source§impl<T> BitRange<T> for DsuStatusA
impl<T> BitRange<T> for DsuStatusA
Source§impl<T> BitRangeMut<T> for DsuStatusAwhere
u8: BitRangeMut<T>,
impl<T> BitRangeMut<T> for DsuStatusAwhere
u8: BitRangeMut<T>,
Source§fn set_bit_range(&mut self, msb: usize, lsb: usize, value: T)
fn set_bit_range(&mut self, msb: usize, lsb: usize, value: T)
Source§impl Clone for DsuStatusA
impl Clone for DsuStatusA
Source§fn clone(&self) -> DsuStatusA
fn clone(&self) -> DsuStatusA
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for DsuStatusA
impl Debug for DsuStatusA
Source§impl From<DsuStatusA> for u8
impl From<DsuStatusA> for u8
Source§fn from(value: DsuStatusA) -> Self
fn from(value: DsuStatusA) -> Self
Source§impl From<u8> for DsuStatusA
impl From<u8> for DsuStatusA
impl Copy for DsuStatusA
Auto Trait Implementations§
impl Freeze for DsuStatusA
impl RefUnwindSafe for DsuStatusA
impl Send for DsuStatusA
impl Sync for DsuStatusA
impl Unpin for DsuStatusA
impl UnwindSafe for DsuStatusA
Blanket Implementations§
Source§impl<T> BitMut for Twhere
T: BitRangeMut<u8>,
impl<T> BitMut for Twhere
T: BitRangeMut<u8>,
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> FmtForward for T
impl<T> FmtForward for T
Source§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
self to use its Binary implementation when Debug-formatted.Source§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
self to use its Display implementation when
Debug-formatted.Source§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
self to use its LowerExp implementation when
Debug-formatted.Source§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
self to use its LowerHex implementation when
Debug-formatted.Source§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
self to use its Octal implementation when Debug-formatted.Source§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
self to use its Pointer implementation when
Debug-formatted.Source§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
self to use its UpperExp implementation when
Debug-formatted.Source§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
self to use its UpperHex implementation when
Debug-formatted.Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
Source§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
Source§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
self and passes that borrow into the pipe function. Read moreSource§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
self and passes that borrow into the pipe function. Read moreSource§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
Source§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R,
) -> R
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
Source§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
self, then passes self.as_ref() into the pipe function.Source§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
self, then passes self.as_mut() into the pipe
function.Source§fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
self, then passes self.deref() into the pipe function.Source§impl<T> Tap for T
impl<T> Tap for T
Source§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
Borrow<B> of a value. Read moreSource§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
BorrowMut<B> of a value. Read moreSource§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
AsRef<R> view of a value. Read moreSource§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
AsMut<R> view of a value. Read moreSource§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
Deref::Target of a value. Read moreSource§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
Deref::Target of a value. Read moreSource§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
.tap() only in debug builds, and is erased in release builds.Source§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
.tap_mut() only in debug builds, and is erased in release
builds.Source§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
.tap_borrow() only in debug builds, and is erased in release
builds.Source§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
.tap_borrow_mut() only in debug builds, and is erased in release
builds.Source§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
.tap_ref() only in debug builds, and is erased in release
builds.Source§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
.tap_ref_mut() only in debug builds, and is erased in release
builds.Source§fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
.tap_deref() only in debug builds, and is erased in release
builds.